The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 9, 2013, 10:44 AM   #1
MarcB
Member
 
Join Date: January 7, 2013
Posts: 39
New to this forum

Hello all. My name is Marc and I've been reloading and casting my own bullets since I was 13 years old. (I'm now 61). I used to own a gun shop on the west coast and bought direct from most manufactures. We were the largest distributor of Hornaday Products, Winchester Rifles and Ammo west of the Mississippi River.I stockpiled a lot of stuff before retiring and am shocked as to the prices nowdays. For example we used to sell primers for 69 cents!
I have a small (compared to some) collection of firearms. My favorite ones are my Contender which I have barrels ranging from a 22 Hornet to a 454 Casull Mag. My favorite rifles are my 220 swift, 257 Roberts and my 50-140 Sharps.
Most of the gun powder I have in my magazine isn't made anymore, but I have a wealth of info on what I do have and can help those that have some of these older powders and I'm sure that I'll learn new things here too.
MarcB is offline  
Old January 9, 2013, 12:43 PM   #2
j357
Senior Member
 
Join Date: January 25, 2009
Location: Liberty Twp, OH
Posts: 220
Welcome aboard MarcB. Glad to have you with us. Sounds like your knowledge and experience will fit right in.
j357 is offline  
Old January 9, 2013, 01:49 PM   #3
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,295
Welcome...and thanks for telling us a little bit about yourseld...

A lot of guys on this forum have been shooting and reloading for a long time ( me for about 50 yrs too )....but I don't cast anything ...
BigJimP is offline  
Old January 9, 2013, 05:08 PM   #4
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,262
I welcome you also MarcB, this is a great forum, you'll learn to separate the wheat from the chaff as time goes. There are a slough of veteran gunmen on this forum who know what they're talking about, and a great staff of moderaters, who are knowledgeable in their own rite.
Enjoy!
__________________
Thanks for coming!
hooligan1 is offline  
Old January 9, 2013, 06:48 PM   #5
serf 'rett
Senior Member
 
Join Date: June 25, 2009
Location: Stuttgart
Posts: 1,310
All Hail the new old guy...or would that be the old new guy?

Glad to have you aboard.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part.
serf 'rett is offline  
Old January 10, 2013, 09:36 AM   #6
MarcB
Member
 
Join Date: January 7, 2013
Posts: 39
Thanks for the welcome. Like I said I'm a lurker. My gun powder is so old that most is not made so I won't be much help there but maybe I can contribute in other ways.
MarcB is offline  
Old January 10, 2013, 10:51 PM   #7
ZOOM2X
Member
 
Join Date: March 4, 2012
Location: Johnson City, TN
Posts: 67
I'm not only new to the forum but new to reloading. I've been reading for a while and getting to understand. Even met a guy at the LGS ( local gun store) and he let me come over and load some, He and his dad had quite a collection and lots of experience. Both LEOs.

Where do you now live? I'm in Johnson City, TN
__________________
ZOOM 2X, pronounced "ZOOM ZOOM", is the tag on my supercharged, etc. Miata.

NRA Benefactor
ZOOM2X is offline  
Old January 10, 2013, 11:57 PM   #8
+1k ammo
Senior Member
 
Join Date: January 9, 2013
Posts: 191
Welcome -Wow, loading since 13! I have been shooting since a young age, but only recently reloading.

Despite your aging powder, I am sure you have a wealth of info on reloading.

As my title indicates, I am fascinated with stock piling ammo! I am new and not have much time, so I tend to shoot up what I make so am never really stock pilling!

I guess I could have worse problems!
+1k ammo is offline  
Old January 11, 2013, 12:46 PM   #9
oneoldsap
Senior Member
 
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,585
Welcome to the TFL forums Marc ! I've got a couple of years on you , but we've been reloading for about the same amount of time . I have a few older powders myself , some of it makes me wonder why it became obsolete . Do you have any W-785 ?
oneoldsap is offline  
Old January 11, 2013, 06:16 PM   #10
MarcB
Member
 
Join Date: January 7, 2013
Posts: 39
I live in, do I dare say it, in the anti-gun Calif. And yes I have a pound of W-785. Mostly I use H4227 H110 H380 H870 HS-6 and Trap100 I used to by direct from Hodgdon so that's why so many powders form one company. Only other powder I have a lot of is Accurate H680 for my 264 mag and it eats powder like it free.
MarcB is offline  
Old January 13, 2013, 11:03 AM   #11
jj320
Senior Member
 
Join Date: January 7, 2013
Location: hobart,in
Posts: 105
Welcome aboard i am also new to the group and have found a great deal of information on the boards
jj320 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08975 seconds with 9 queries