The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 7, 2013, 10:06 AM   #1
SprawlCowboy
Member
 
Join Date: February 1, 2011
Posts: 20
Online Ammo Sold Out.

I've found that many retailers are sold out of .223, 7.62x39, 9x19, .45 ACP.

What better time to get into reloading right?

Well I'm finding that the constituents are nearly as scarce as the manufactured rounds.

Does anyone know of any suppliers that have stock or replenish frequently upon being sold out?
SprawlCowboy is offline  
Old January 7, 2013, 10:24 AM   #2
CADILLAC HOOSIER
Member
 
Join Date: August 28, 2010
Location: INDIANA
Posts: 62
I've been buying bullets from Berry direct. Have always had 3-4 day delivery. ordered again Saturday and now get 3-4 WEEK delivery. At least they're still taking orders. They pay freight on orders of $75, used to be $50. I can still get powder at LGS, but primers are scarce. good luck, load and shoot safe. HOOSIER
CADILLAC HOOSIER is offline  
Old January 7, 2013, 10:31 AM   #3
Misssissippi Dave
Senior Member
 
Join Date: December 5, 2009
Posts: 1,407
I ordered my restock of components for .45 acp this weekend. I got Large Primers (Winchester) and powder (WST) from Powder Valley. I got the bullets from Montana Gold.

You might find it very hard to get what you need for military rifle reloading. I also found not much in the way of small pistol primers.
Misssissippi Dave is offline  
Old January 7, 2013, 11:10 AM   #4
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,190
was just up to Cabela's last Saturday... no small pistol, or small rifle primers... I did buy a box of large pistol primers since I shoot alot of 45 Colt ( especially during the summer CAS season ) they had several bullets...

I've been disapoint in my normal on line sources, I'm going through my ammo & components, since I'm moving them, & tried to buy plastic ammo boxes, & even in calibers like 25-06, 7 X 57 etc... they were all out... while at Cabelas, I was suprised that I was able to pick up some plastic boxes for my 357 max ( which share the same boxes as 223 )

tough time to "get into" reloading... you can buy the press, & in some cases the dies, but you'll have to be patient on alot of the components... sad, because I don't have an over abundance of small pistol primers ( which of course I could load into 9mm... but that I use most of for 32 H&R Magnum for MRS to shoot CAS during the summer )
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old January 7, 2013, 11:56 AM   #5
rajbcpa
Senior Member
 
Join Date: August 27, 2012
Posts: 313
Ahhhh... you are a tad late.

My local gun stores have been out of most primers since August. I went to 4 local guys this weekend. I found one pound of powder and 1K primers and I consider myself very lucky.

Nearly all of the large Internet retailers I use have virtually no inventory of primers or powder. You can still buy brass and bullets without issue, I believe.
rajbcpa is offline  
Old January 7, 2013, 12:25 PM   #6
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,190
I've been having trouble getting brass in cartridges ranging from 17 Fireball, 22 Hornet, up to 25-06 & 35 Remington... seems most brass is tight as well, even if it's not on one of "those" calibers
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old January 7, 2013, 03:16 PM   #7
serf 'rett
Senior Member
 
Join Date: June 25, 2009
Location: Stuttgart
Posts: 1,310
Better late than never.

I hope the famine doesn't last 1-1/2 years like the 2008 run; however, if you get started now, you'll have time to develop your ability to track down components, plus you'll compile a list of sources for the next scare. Living through a famine helps you to know how to stock up during the feast years.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part.
serf 'rett is offline  
Old January 7, 2013, 03:33 PM   #8
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,307
It depends on the retailer. I went to Cabella's yesterday. Many of the shelves are bare. Gun racks are showing a lot of empty slots. They only had a few reloading presses left. For rifle primers all they had were large magnum. For pistol all they had left was small pistol magnum. All pistol, AR, AK, and .22 LR semi auto magazines were sold out.

I asked a member of the management staff if there was another shortage going on. He said not to worry. He was told that they could not order anything until inventory was completed. Then most things would be restocked. Estimated time for that to happen from what he said was around 2 weeks. So looks like we get to find out then.

The local gun store has primers. They are not known for low prices. I treat it like going to the 7-11 for a gallon of milk, and loaf of bread.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Old January 9, 2013, 09:53 PM   #9
boxing21
Member
 
Join Date: March 22, 2006
Posts: 36
I've looked everywhere for small pistol primers. With no luck online, I gave the local gunshow a shot. Picked up 2k Federal small pistol primers, 2k CCI small pistol primers, and three pounds of Power Pistol powder
boxing21 is offline  
Reply

Tags
ammunition , reloading

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08069 seconds with 7 queries