The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 5, 2013, 02:33 PM   #1
deepforks
Member
 
Join Date: October 15, 2011
Location: Southwest Idaho
Posts: 89
changing from lyman turret to redding single stage

so i'm considering selling my lyman t2 and getting a redding single stage. the lyman is ok, but seems to have a bit of play in the ram. i'm wondering if you can buy the hornady lock n load bushing insert for the redding? if so, i think this would be an ideal set up for me...just buy the bushings for my existing dies and switch out will be a breeze. does anyone else do this with a single stage? i've read very good reviews on the hornady bushings but would like to hear some pros/cons from anyone hear that uses them. thanks guys.
deepforks is offline  
Old January 5, 2013, 08:13 PM   #2
jwrowland77
Senior Member
 
Join Date: March 23, 2012
Location: Conway, Arkansas
Posts: 982
I have the Hornady SS LNL and love it. Really don't have any cons on the LNL bushings or anything. I love them.
jwrowland77 is offline  
Old January 5, 2013, 08:40 PM   #3
serf 'rett
Senior Member
 
Join Date: June 25, 2009
Location: Stuttgart
Posts: 1,355
I use the bushing system in my RCBS Rock Chucker and love it. Very fast die changes. I liked it enough to buy a separate RCBS taper crimp die for 9mm. Once the sizing, expanding and crimp dies are set and locked, it takes less than 5 seconds to swap dies. Same goes for the seating die unless you change depths.

I don't know if the Redding will accept the bushing, but their web site should help.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part.
serf 'rett is offline  
Old January 5, 2013, 08:44 PM   #4
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,310
The Lee Classic Cast now has the breech lock with the quick change bushings. It also has a better primer disposal system as well. They also have some of the breech lock bushings that have a lock ring made into it. You adjust the die. Then tighten an allen bolt. Now to change dies you push the black button give a quarter turn lift the die out.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06577 seconds with 9 queries