The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 6, 2013, 08:07 PM   #1
Okcafe86
Member
 
Join Date: October 15, 2012
Posts: 51
Reloading times

How long do your typical reloading sessions last?
__________________
PRIDE RUNS DEEP
US NAVY SILENT SERVICE
MM2/SS
A-GANG/LOWER LEVEL MAFIA
Okcafe86 is offline  
Old January 6, 2013, 09:29 PM   #2
chris in va
Senior Member
 
Join Date: December 26, 2004
Location: Louisville KY
Posts: 12,350
Depends how many boolits I have, or whatever powder is left. Sometimes 2, 3 movies worth or a couple football games.
chris in va is offline  
Old January 6, 2013, 09:35 PM   #3
BigD_in_FL
Junior member
 
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,982
Chris, I like your time measurements.......I'll bring a reloading small bench into the living room, especially if there is a soccer game from Europe on,, that is a two hour time frame
BigD_in_FL is offline  
Old January 7, 2013, 06:57 AM   #4
Okcafe86
Member
 
Join Date: October 15, 2012
Posts: 51
I should drag s tv into my reloading room, otherwise I get bored.
__________________
PRIDE RUNS DEEP
US NAVY SILENT SERVICE
MM2/SS
A-GANG/LOWER LEVEL MAFIA
Okcafe86 is offline  
Old January 7, 2013, 07:41 AM   #5
4runnerman
Senior Member
 
Join Date: January 16, 2010
Location: Minnsota
Posts: 2,657
I break mine down into sections. I load 100 to 300 at a time. One night i will size and trim,chamfer, Next night I prime,Next night i powder and load. Depending on how many I am doing,somewhere between 1 to maybe 3 hrs.
I am doing something with the loading aspect 7 days a week,but only for a hour or 2 or3 a day. This morning i was downstairs at 5 AM ( work at 8 ). I got 100 22-250's and 200-223's primed and ready to load.
__________________
NRA Certified RSO
NwCP- Performance Isn't Optional
4runnerman is offline  
Old January 7, 2013, 07:51 AM   #6
David Bachelder
Senior Member
 
Join Date: August 23, 2011
Location: Trinity, Texas
Posts: 610
I'll spend a say casting, sizing and lubing. The bulets dry overnight, or longer, and I spend the time reloading. I guess I spread it out to a little every week or so.

I do keep a reasonable ammo inventory so there is always something to do.
__________________
David Bachelder
Rookie reloader, but learning fast
Trinity, Texas
I load, 9mm Luger, .40, 38 S&W, .38 Special, .357, .45ACP, .45 Colt, .243 and 30-06
David Bachelder is offline  
Old January 7, 2013, 08:04 AM   #7
hounddawg
Senior Member
 
Join Date: March 1, 2009
Posts: 760
retired so I spend a couple of hours each day minimum doing something. Pistol ammo is done in batches as I feel like it. I may do a 2 hour session or just 30 minutes here and an hour there doing small tasks. I have enough pistol and .223 loaded to do several range sessions. LR rifle I tend to load as I need, but I am always tweaking the performance of one or the other
__________________
Government is like a baby. An alimentary canal with a big appetite at one end and no sense of responsibility at the other. - Ronald Reagan
hounddawg is offline  
Old January 7, 2013, 09:52 AM   #8
serf 'rett
Senior Member
 
Join Date: June 25, 2009
Location: Stuttgart
Posts: 1,262
15 minutes to 15 hours.

The 15 minutes is to prime a 100 cases. The 15 hours is when I crank up the wet tumbler for a day - actual "working time" is about 10 minutes to load/unload the tumbler every 1.5 to 2 hours.

With batch loading, I tumble, sort by headstamp, size, expand, count, ZipLock and store. With all the prep work done before loading day, it's fairly easy to load about 100 rounds in the first hour on single stage, even less time for the next 200 to 600.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part.
serf 'rett is offline  
Old January 7, 2013, 11:17 AM   #9
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 7,766
1st off... never a TV on in my loading room, when I'm actually reloading... maybe during some meanial case prepping session, but actual reloading gets 100% of my attention... stereo is the only thing on during reloading...

I typically load 100-150 rounds at a time ( on a single stage press )
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old January 7, 2013, 11:33 AM   #10
schmellba99
Senior Member
 
Join Date: January 8, 2008
Posts: 541
It depends, but usually I load up 100-200 at a time on the progressive and maybe 50 at a time on the single stage.

I'd much rather do this every night or every other night than sit down and try to load up some massive quantity in one sitting - even though I love reloading, it can be very monotonous and I don't want to get bored, complacent or otherwise in a place where I'm not paying maximum attention. That's when bad things happen.

My last run was a bunch of 5.56 and it lasted over 2 weeks. 100 rounds here, 200 rounds there every other day or so and I put together a few thousand rounds in 30 minute to 45 minute sessions. A side bonus is that because the sessions were fairly short, I didn't get yelled at by the wife for neglecting family time.

With single stage, I typically do one type of prep at a time. First night will be cleaning and prepping primer pockets. 2nd night will be neck turning, next night will be sizing, then priming and loading.

Maybe I'm slightly ADD and just don't know it.
schmellba99 is offline  
Old January 7, 2013, 11:38 AM   #11
Xfire68
Senior Member
 
Join Date: March 31, 2010
Location: Communist State of IL.
Posts: 1,362
I spent a little over 45 mins last night reloading 10mm on my LNL AP. I made 250 180 Nosler JHP with 9.4g's of Blue Dot, WLP primers and Starline brass.

Took my time and had to reload the primer feed tube 3 times.

I also spent some time on the Lee Classic Turret making about 75 .223 loads. Not sure how long it took tho.
__________________
NRA Life Member, SAF Member
Xfire68 is offline  
Old January 7, 2013, 11:54 AM   #12
wncchester
Senior Member
 
Join Date: December 1, 2002
Posts: 2,830
"How long do your typical reloading sessions last?"

From 15 minutes to 12 hours, depending on the goal.

Hope that helps resolve the question, whatever the ...?
wncchester is offline  
Old January 7, 2013, 02:36 PM   #13
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,049
I get tired of sitting...after an hour or so ....

....but I'm using progressive, auto indexing, presses for handgun ammo and shotshells.....so its really easy to get about 800 rds an hour off of any of my presses.

I shoot about 500 handgun rounds a week...and about 200 shotshells a week...so keeping an inventory with only an hour here or there...is not that big a deal. No little kids living in my house anymore ...so my presses are permanently setup and ready to roll, in my shop.

I was bored this am before I came to the office ...so I loaded about 250 rds of .357 mag on my press in 15 or 20 min...listening to the radio..../ case gagued everything and boxed it up ( I shot 5 boxes on Sat / so just replenishing the inventory). I usually keep 10 - 50 boxes, per caliber, in inventory ...

I have about 40 boxes of .357 mag in inventory ....and I noticed this AM, I'm down to about 12 boxes of 9mm....so I'll get the press cleaned up and lubed, and converted to 9mm this week, and run 40 or 50 boxes of 9mm in 3 or 4 hours this week.../ so I don't need to spend half a day reloading...just an hour or so here and there...
BigJimP is offline  
Old January 7, 2013, 02:44 PM   #14
oneoldsap
Senior Member
 
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,581
Usualy 2-4 hrs. , and I'd rather watch corn grow , than watch European (or any other soccer for that matter) .
oneoldsap is offline  
Old January 7, 2013, 02:58 PM   #15
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,049
Watching paint dry ...is better than soccer....
BigJimP is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09602 seconds with 9 queries