The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old March 13, 2013, 10:07 AM   #76
Jevyod
Member
 
Join Date: May 5, 2012
Location: Pennsylvania
Posts: 98
pm sent on scope.
Jevyod is online now  
Old March 13, 2013, 08:47 PM   #77
dhedrick
Junior Member
 
Join Date: September 13, 2011
Posts: 10
Re: Hard Times, Let's see a free item/pass it forward thread

A bunch of 45 brass going out to Rebs tomorrow.

I still have a little 40 brass too that I would be happy to pass along.

Looking for any reloading equipment that anyone might be willing to part with. I have nothing - no equipment our supplies but am trying to get set up to load 9mm and 223...

~ Dale
dhedrick is offline  
Old March 14, 2013, 08:10 PM   #78
pnolans
Member
 
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
@dhedrick:

I'll look around. I believe I have an extra powder trickler. I'll see if I have anything else I can spare.

Pat
__________________
”You cannot invade the mainland United States. There would be a rifle behind each blade of grass.”
~Admiral Isoroku Yamamoto

"DUMP HICKENLOOPER".. my soon to come bumper sticker.
pnolans is offline  
Old March 14, 2013, 08:17 PM   #79
dhedrick
Junior Member
 
Join Date: September 13, 2011
Posts: 10
Re: Hard Times, Let's see a free item/pass it forward thread

Thanks for looking pat - that would be fantastic!
dhedrick is offline  
Old March 15, 2013, 12:54 PM   #80
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,229
9MM brass shipped today to Dhedrick and thank you for the 45 ACP

I am going to check to see if I have any other brass I don't need and will post if I find any.
rebs is offline  
Old March 15, 2013, 01:42 PM   #81
dhedrick
Junior Member
 
Join Date: September 13, 2011
Posts: 10
I posted some additional brass including some oddballs in a free brass thread in the reloading forum if anyone is interested.
__________________
~ Dale
dhedrick is offline  
Old March 15, 2013, 05:14 PM   #82
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,229
I couldn't find it
rebs is offline  
Old March 18, 2013, 08:25 AM   #83
DarcyPotter1
Member
 
Join Date: March 8, 2013
Posts: 53
Burris 3-9x40 fullfeid ll

Jevyod send me a adress and I will send you the scope it will be easyer that way and you can do the same for someone some day my son tells me that its called doing a forward and I think this Idea is great hope someone keeps it going the scope is silver finish and in new shape and the rifle it was on had only fired 7 shots so enjoy it and I hope you can put it to good use
DarcyPotter1 is offline  
Old March 18, 2013, 06:08 PM   #84
dhedrick
Junior Member
 
Join Date: September 13, 2011
Posts: 10
Re: Hard Times, Let's see a free item/pass it forward thread

Brass received from rebs - thank you very much!
dhedrick is offline  
Old March 18, 2013, 07:43 PM   #85
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,229
WOW a lot of brass received from dhedrick, thank you very much
rebs is offline  
Old March 20, 2013, 09:59 PM   #86
breakingcontact
Junior member
 
Join Date: October 25, 2012
Location: Austin, TX
Posts: 736
Haven't participated in this thread, but did give a mag to a friend today. We definitely need to help each other out more.

I've got an AK scope mount, how would I get that in the give away here. I took it off a Saiga 308 AK, so not sure what it fits.
breakingcontact is offline  
Old March 22, 2013, 10:25 AM   #87
Quincunx
Senior Member
 
Join Date: July 9, 2005
Location: West "By God" Virginia
Posts: 377
While going through some of my parts boxes last night, I found a 3" stainless .38 Special J-frame barrel that I bought a couple of years ago and wound up not needing. Free to good home!
__________________
A mind without instruction can no more bear fruit than can a field, however fertile, without cultivation. --- Cicero
Quincunx is offline  
Old March 23, 2013, 03:33 PM   #88
dhedrick
Junior Member
 
Join Date: September 13, 2011
Posts: 10
Re: Hard Times, Let's see a free item/pass it forward thread

Have the below and a small amount of .40 free to a good home if anyone is interested.
35 of 45 Colt
25 of 38 Special
27 of 357 Mag

Could really use 223 brass if anyone has any...
dhedrick is offline  
Old March 23, 2013, 06:54 PM   #89
pnolans
Member
 
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
9mm taper crimp die?

I got ready to start reloading some 9mm brass, and discovered that the die set I bought from Hornady has, for some reason, a ROLL CRIMP die .

I have a taper crimp die on backorder from Midway, but who knows when that will come in.

Heck, I'm willing to give it back when I get the one I ordered.

So... does anyone have a 9mm taper crimp die that they can part with, even temporarily?
PLEASE DISREGARD THIS REQUEST
I have this working the way I want with the dies I have.

Thanks,

Pat
__________________
”You cannot invade the mainland United States. There would be a rifle behind each blade of grass.”
~Admiral Isoroku Yamamoto

"DUMP HICKENLOOPER".. my soon to come bumper sticker.

Last edited by pnolans; March 25, 2013 at 11:02 AM.
pnolans is offline  
Old March 24, 2013, 06:55 AM   #90
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,229
If I had one I would loan it to you or if I didn't use it I would give it to you.

Maybe you could cancel the one you have on back order and get this one.

http://www.amazon.com/Hornady-Taper-...words=9mm+dies
rebs is offline  
Old March 24, 2013, 12:32 PM   #91
pnolans
Member
 
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
Thanks, Rebs... that's what I did. Amazon actually had it in stock.
__________________
”You cannot invade the mainland United States. There would be a rifle behind each blade of grass.”
~Admiral Isoroku Yamamoto

"DUMP HICKENLOOPER".. my soon to come bumper sticker.
pnolans is offline  
Old March 24, 2013, 10:52 PM   #92
pnolans
Member
 
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
Well, it actually occurs that Amazon does NOT have it in stock.... It is backordered.

So...I'll call Hornady tomorrow and see if I can b*ch at them enough to get them to trade it for me.


PLEASE DISREGARD THE PREVIOUS REQUEST. I've got this working the way I want it to, with the dies I already have.

Thanks
__________________
”You cannot invade the mainland United States. There would be a rifle behind each blade of grass.”
~Admiral Isoroku Yamamoto

"DUMP HICKENLOOPER".. my soon to come bumper sticker.

Last edited by pnolans; March 25, 2013 at 11:01 AM.
pnolans is offline  
Old March 25, 2013, 09:54 AM   #93
dhedrick
Junior Member
 
Join Date: September 13, 2011
Posts: 10
45 Colt & 40S&W shipping out today.

Still have:
25 of 38 Special
27 of 357 Mag
__________________
~ Dale
dhedrick is offline  
Old March 25, 2013, 12:02 PM   #94
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,229
brass

I have the following brass that I don't need. All are once fired in new condition.

30-30 = 40
270 = 45
243 = 18
308 = 18
rebs is offline  
Old March 27, 2013, 06:14 AM   #95
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,229
The brass is going out to Fusion, him and a friend of his can use it all.
rebs is offline  
Old March 27, 2013, 08:10 PM   #96
Fusion
Senior Member
 
Join Date: August 13, 2010
Posts: 388
I appreciate it Rebs. I have a Lee seating die for a .243 Winchester that I'm not using if anyone could use it.
Fusion is offline  
Old March 28, 2013, 12:51 PM   #97
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,229
Fusion, the brass went out this morning USPS priority box, you should have it Saturday
rebs is offline  
Old March 29, 2013, 12:34 PM   #98
Skitter
Senior Member
 
Join Date: March 5, 2013
Location: NW Houston TX
Posts: 156
Damn, good catch Fusion, I'm trying to get 30-30 and I can't find anything anywhere factory ammo or otherwise.
__________________
Raised with guns only to realize how much I DIDN'T know. Newly acquired personal inventory is increasing, feed my obsession for knowledge!
Skitter is offline  
Old March 29, 2013, 04:01 PM   #99
dhedrick
Junior Member
 
Join Date: September 13, 2011
Posts: 10
Re: Hard Times, Let's see a free item/pass it forward thread

More 9mm brass received from rebs today. Thank you very much!
dhedrick is offline  
Old March 30, 2013, 02:11 AM   #100
dakota.potts
Senior Member
 
Join Date: February 25, 2013
Location: Saint Augustine, Florida
Posts: 1,165
Next time I go shooting I'll try and capture some of our brass. We've got .380, .40, and .308. Various including Blazer, Remington, and Lawman. Never shipped anything about before and I don't even know what's reloadable but if someone needs it I'll scoop some up and figure out the rest along the way. I'll be happy to trade for ammo, targets, scopes, various magazines, or anything you have if you're willing. Otherwise I'll just send them along for the price of shipping on request.
dakota.potts is online now  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.11930 seconds with 8 queries