The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools
Old December 29, 2012, 10:10 PM   #1
bad seed
Junior Member
 
Join Date: January 28, 2012
Posts: 3
9mm short?

is it possible to fire a .380 cartridge through a 9mm?
bad seed is offline  
Old December 29, 2012, 10:21 PM   #2
Cheapshooter
Senior Member
 
Join Date: December 2, 2007
Location: Missouri
Posts: 4,711
May be possible, but not practical, reliable, advisable, or wise!
Shorter answer......NO
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!
Cheapshooter is offline  
Old December 29, 2012, 10:26 PM   #3
chris in va
Senior Member
 
Join Date: December 26, 2004
Location: Louisville KY
Posts: 12,638
The case headspaces on the mouth, so the shorter 380 round won't chamber in a safe manner.

DON'T do it.
chris in va is offline  
Old December 29, 2012, 11:15 PM   #4
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 36,298
Your question could be read in one of several ways...

Other's have answered correctly that it's not a good idea to try to fire a .380 through a 9mm.

However, 9mm Short (the title of your thread) is but one name for the what we known as the .380 Auto.

In Europe you will see guns chambered for .380 marked 9mm Corto (Spanish), 9mm Kurz (German), or 9mm Browning Short (England).

It's possible that you have a gun marked 9mm Short or 9mm B Short. If that is the case, then yes, the .380 Auto WILL chamber and fire just fine in a gun so marked.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old December 30, 2012, 11:38 AM   #5
qwiksdraw
Senior Member
 
Join Date: May 23, 2012
Posts: 405
The 380 round is also known as 9X17.

Just out of curiosity, while I had my 9MM barrel out for cleaning I checked to see if the 380 would seat in the barrel. It didn't...too wide.
qwiksdraw is offline  
Old December 30, 2012, 12:25 PM   #6
Rainbow Demon
Senior Member
 
Join Date: September 27, 2012
Posts: 397
The Astra model 400 in 9mm Bergman/Largo has been safely fired with the .380 cartridge and the 9x19 as well as several other 9mm/.38 rimless or semi rimmed cartridges, this being a blowback pistol relying on a extra heavy spring rather than a locked breech recoil operated autoloader.

If the extractor holds the rim solidly the firing pin should reach the primer.

Chamber dimensions of individual pistols will govern whether the cartridge will chamber.

Downsides are that if the case is pushed deeper in the chamber by the primer cup on ignition then you might get a blown primer, or the casehead may slam back against the breechface hard enough to break a firing pin tip or damage the breechface or extractor slot.

So while this combo may pose no danger to the shooter, it may cause damage to the pistol, at least if done repeatedly.
Rainbow Demon is offline  
Old December 30, 2012, 01:31 PM   #7
Aguila Blanca
Senior Member
 
Join Date: September 25, 2008
Location: CONUS
Posts: 6,675
I won't go into why, but I have intentionally fired .380 ACP through both a 9mm Hi-Power and through a 1911 using both a 9mm barrel and a .38 Super barrel. It's a bit tough on the extractor because the case is "headspacing" (if we can still use that term) on the extractor hook, but aside from that it worked.

I don't make a practice of it. It was done in the pursuit of a very specific investigation I was involved in at the time.

I don't think it's unsafe, but I don't recommend it.
Aguila Blanca is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07482 seconds with 9 queries