|December 28, 2012, 03:59 PM||#1|
Join Date: March 14, 2011
Location: Central Pennsylvania
Track of the Wolf Bucks County rifle kit - Draw Filing
I know not many of you are into this rifle building stuff. But, for the few who are, I hope you're enjoying this series.
This is a mini update on the TOW Bucks county flintlock rifle kit build. It is kind of out of sequence with the rest of the videos. so I broke it out on its own.
It covers draw filing the barrel. Typically I only draw file and polish the top three barrel flats. But for this build I did the bottom obliques and the side flats. I'll do the top later.
I've been complaining that the barrel was tight in the channel, and I was blaming it on the stock. I finally got around to measuring the 13/16th Colerain barrel I'm using.
True 13/16ths is 0.8125 inches. This barrel is 0.8245 inches. I measured a couple of Green Mountain barrels from rifles I built 20 years ago and they measured 0.8145.
So the Colerain barrel is a little fat.
Here's my draw filing procedure...
|December 28, 2012, 04:30 PM||#2|
Join Date: October 24, 2008
Location: Chesapeake, VA
How much metal did you take off with the draw filing operation?
I guess I am asking how thick the barrel was after your draw filing operation was complete?
My reading of history convinces me that most bad government results from too much government. Thomas Jefferson
|Thread Tools||Search this Thread|