The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 26, 2012, 11:55 AM   #1
MTHall720
Member
 
Join Date: November 7, 2012
Location: Central Maryland
Posts: 58
Finish maintenance on a 1911:Advice please

Is there a way to make a non-reflective black finish look more like a polished blued appearance with a hand applied polish/wax such as Flitz or MAAS?
MTHall720 is offline  
Old December 26, 2012, 12:11 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 10,894
If you polish matte black oxide enough to make it shiny, you will get shiny BARE STEEL. The oxide layer is thinner than the matte texture of the metal.

I have read of "oil buffing" Parkerizing to a bit of a gloss.

I don't know what would happen if you waxed it like a car fender.
Jim Watson is online now  
Old December 27, 2012, 08:43 AM   #3
drail
Junior member
 
Join Date: February 2, 2008
Posts: 3,150
No. If you want a gloss finish you must strip the old finish off, polish the steel and then refinish. Bluing (or oxide) is not like paint on a car. You will simply "polish" it down to raw steel or build up a thick layer of wax that will simply flake off.

Last edited by drail; December 29, 2012 at 07:06 PM.
drail is offline  
Old December 28, 2012, 09:23 AM   #4
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,187
I'm not sure that a thick filling wax layer could not be built up, but it would likely yellow and come off over time. You can give the matte finish a wetted look with Johnson't Paste Wax, and it's a perfectly good gun preservative, but turning it from matte to satin is about as far as I would expect that to go.

As the others said, under that oxide or black Parkerizing layer (whichever you have) is at least an etched, and quite possibly also abrasive blasted matte steel surface.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Patron Member
Unclenick is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07388 seconds with 9 queries