The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old December 26, 2012, 08:18 AM   #1
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,119
Scored 2 new calibers right at the end of the year... got any good loads ???

for 35 Whelen & 7 Rem Mag ???

probably won't start loading for either till mid winter, but am collecting dies, brass & components now... you guys got some favorite loads for these 2 ???

I guess while I'm at it, I'm rebarreling my 7 X 57 Mauser... the throat was pretty bad, & factory rounds didn't group well, so I'll be doing up some loads for that cartridge as well... ( the 7 X 57 is on a '93 Mauser, that was fully "sporterized" before I bought it, it's a very nice looking rifle, with turned bolt handle, Timminy trigger, & cock on open conversion, & nice hunting stock... but it is still a 93 Mauser, so I need to keep the 7 X 57 loads pretty tame )

anyway... good hunting bullets & or powder's for these 3 if you are a fan, would be great
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old December 26, 2012, 09:08 AM   #2
William T. Watts
Senior Member
 
Join Date: January 20, 2010
Location: Central Arkansas
Posts: 755
IMR7828 is a very good number for the 7 mag, my load was 67grs with a 150gr Nosler Partition. With a new rifle a new powder START LOW and work up as pressure signs permit. Unusually accurate in my rifle plus this is the powder used in Remington factory ammunition when the 7mm Remington mag was introduced.. William
William T. Watts is offline  
Old December 26, 2012, 09:18 AM   #3
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,119
I think I have some Nosler 150 grain bullets... the 7 mag is a custom that has a Remington 7 Mag take off barrel on it, not new, but new to me... I'm hoping to have the 7 mag running closer to hot, since the 7 X 57 will be on the tame side, because of the small ring action it's in... will of couse start tame & work my way up... thanks for the suggestions
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old December 26, 2012, 09:34 AM   #4
jwrowland77
Senior Member
 
Join Date: March 23, 2012
Location: Conway, Arkansas
Posts: 967
IMR7828 and IMR4350 for 7mm RM. my best so far is:

1)Hornady 139gr BTSP Interlock
2)IMR4350 57gr I know this seems light but gives me consistently between .500-.600" groups at 100yds.
3)CCI Large rifle magnum primer
4)WIN brass
5)OAL 3.280... This gets me .03 from lands and grooves to the ogive.

I shoot this from a Remington 700 BDL.
jwrowland77 is online now  
Old December 27, 2012, 12:51 PM   #5
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,249
My 7mm rem mag loves all kinds of bullets so far, my next purchas will be Barnes TTSX and the LRX.
IMR 7828, IMR 4831, IMR 4350, are my top powders and I've tried H1000, H4831sc, Winchester Supreme 780, H4350.
When I load 160 grn Accubonds I use the IMR 7828, I use the IMR 4831 for 140 grn Accubonds, and 150 grn B-Tips. I use the IMR 4350 for the 150 grain Partition bullet, all these different bullet and powder combos shoot less than 3/4 MOA at 100 yds, to the same poi mostly.
Also I don't have the 35 Whelen, But I would try the bullet manufactures manual.
__________________
Thanks for coming!

Last edited by hooligan1; December 28, 2012 at 08:01 AM.
hooligan1 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06271 seconds with 9 queries