The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old December 19, 2012, 06:11 PM   #1
Senior Member
Join Date: December 30, 2007
Location: Texas
Posts: 1,424
.357 Powder and Cylinder Test Pics

50 yd steel silhouette project - 4.5" target

Today's results with both Unique and Win231 at 50yds.

It appears the Win231 is most accurate when pushed to 6 grains.

Hope this helps someone.

The half-asked rest:

Unique Powder at 50 yds

Win231 at 50 yds

Cylinder Test to Check Flyers

Moved in to 25yds for the cylinder test.

Also shot a few at 50yds with 6.4gr of Win231.

Most important thing I've learned about reload accuracy with my Model 686:
158gr LSWC's like to be pushed more than they like powder puff loads.

APPEARS to me that none of the cylinders are way out of whack.

What does the test tell you?

Shooting more, typing less
doc540 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:40 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.10935 seconds with 9 queries