The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 10, 2012, 06:24 PM   #1
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
best penetrating oils

This story came to me from one of the guy's in the EAA club Interesting !!


Subject: Fwd: Penetrating Oils
"Machinist's Workshop" recently published information on various penetrating oils. The magazine reports they tested these products for "break out "torque" on rusted nuts and bolts. A subjective test was made of popular penetrating oils, with the unit of merit being the torque required to remove the nut from a "scientifically rusted" bolt.
Average torque load to loosen nut:

No Oil used ........................516 foot pounds
WD-40 ..................... ........238 foot pounds
PB Blaster .........................214 foot pounds
Liquid Wrench ......................127 foot pounds
Kano Kroil .........................106 foot pounds
ATF/Acetone mix..................... 53 foot pounds

The ATF/Acetone mix is a "home brew" mix of 50/50 automatic transmission fluid and acetone. Note this "home brew" released bolts better than any commercial product in this one particular test.
Our local machinist group mixed up a batch, and we all now use it with equally good results. Note also that Liquid Wrench is almost as good as Kroil for 20% of the price.
ATF/Acetone mix is best, but you can also use ATF and lacquer thinner in a 50/50 mix. ATF = Any type of Automatic Transmission Fluid
Rifleman1776 is offline  
Old December 10, 2012, 08:28 PM   #2
jmfc606
Member
 
Join Date: December 27, 2008
Location: Upstate NY
Posts: 97
I've always used Kroil. The price never bothered me because it always works and I really don't go through alot of it.
__________________
Joe C
NRA Benefactor Life Member
jmfc606 is offline  
Old December 10, 2012, 08:58 PM   #3
oneoldsap
Senior Member
 
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,589
I've had a can of Kroil on my bench forever !
oneoldsap is offline  
Old December 10, 2012, 10:33 PM   #4
Hunter Customs
Senior Member
 
Join Date: March 26, 2005
Location: Osborn, Missouri
Posts: 1,838
I've used straight ATF with good results, I'll have to try it mixed with Acetone.

Best Regards
Bob Hunter
www.huntercustoms.com
Hunter Customs is offline  
Old December 11, 2012, 01:14 AM   #5
wyop
Senior Member
 
Join Date: July 15, 2012
Location: Wonderful, Windy Wyoming
Posts: 133
Having been formerly in the business of breaking loose some rather large nuts on heavy and farm equipment, I've tried all of the above. IMO, nothing worked as consistently well as Kroil. The ATF mixtures would sometimes work well, other times not.
wyop is offline  
Old December 11, 2012, 04:27 PM   #6
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,399
Brothers I have seen the light, its called State PEN, and it made in Canada, its really bad--s!!! If you can find it try it.
It actually seems to turn rust into graphite, for lack of better compare.
__________________
Thanks for coming!

Last edited by hooligan1; December 11, 2012 at 04:38 PM.
hooligan1 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08005 seconds with 9 queries