The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Thread Tools Search this Thread
Old December 5, 2012, 10:33 PM   #1
Junior Member
Join Date: July 5, 2012
Posts: 7
Barrel Nut Question

How hot does the barrel nut on an ar15 get after say a mag dump? I ask because I have the Magpul MOE handguards and they have some play in them, but adding electrical tape to the side that contacts the teeth of the barrel nut removes the play entirely. I dont want the tape to melt or catch fire and for there to be a sticky mess in my handguards.
urge is offline  
Old December 5, 2012, 11:24 PM   #2
Metal god
Senior Member
Join Date: April 10, 2012
Location: San Diego CA
Posts: 2,947
I use electrical tape all the time at work ( construction ) . I've noticed just moderate heat can make electrical tape get gummy and want to slide on it's self . Not sure that's your best option . I do not have a recommendation but I would not recommend elec tape . I'm sure somebody here has had this problem and has a great fix .
Why do I carry a 45 ? because they don't make a 46
Metal god is offline  
Old December 6, 2012, 03:54 AM   #3
Senior Member
Join Date: November 22, 2006
Posts: 789
I've tightened up wobbly handguards before by wrapping Teflon tape around the barrel nut. It's got a high heat resistance, is not adhesive, and you can wrap it slowly until you get your desired level of tightness on the handguard.
scsov509 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.09430 seconds with 9 queries