The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old December 3, 2012, 12:40 PM   #26
rclark
Senior Member
 
Join Date: February 12, 2009
Location: Butte, MT
Posts: 1,642
It is a personal thing.... Really it is. I am a .45 Colt guy so that is what I'd get. But there is nothing wrong with the .44Special. I enjoy both very much. Just the .45 Colt is a bit bigger and has a lot of American history behind it. Load up some BP in them and you almost feel you are shooting in the 1870s....

The .44Special BH Flattop is on the medium frame ... close to the SAA as stated above. I also have .45 Colt flattop convertibles from Lipseys which are also on the medium from. Love 'em. The .44Special can easily handle the Skeeter and Keith loads. The .45 Colt flattop can handle up to ~23,000psi, so it can be heated up a bit too over SAAMI (NO Ruger Only Loads at 30,000psi however). Be aware the medium frame revolvers have a bit smaller grip frame than the standard BH. Also the medium frame and ejector housing are all steel.

Here is a sample of .45 Colt shooting 5 shots off hand at 10Y . And moving out to 15Y offhand, I shoot this target . Like to shoot from a ransom rest sometime to see the 'actual' accuracy down range....

The cataloged .45 Colt BH is on the Large frame which means it can handle Ruger Only Loads if that is what is desired. I have both a original Vaquero and a BH.

Accuracy.... The .44Special (at least the three I have) will shoot circles around an 'out of the box' Ruger .45 Colt (at least the ones I have) if shooting lead. Now that I have 'corrected' my .45 Colt revolvers, that is no longer an issue! BTW, the flattop .45 Colt revolvers were 'close' out of the box. Almost left them alone, but alas I had to tinker and make just a bit better .

Both cartridges I consider reloader cartridges. The sky is the limit if you reload. I really don't have a feel for what you would find in the shelf as I don't buy factory ammo.

I prefer 5 1/2" barrels. Just feels right to me and is a good compromise between 7 1/2" and 4 5/8" . Again this is a personal preference thing. If you plan on hunting the longer barrels give you slightly more velocity and sight radius. The shorter barrels pack better.


I have both. Shoot both... But my hand usually grabs for a .45 Colt revolver when I go a shoot'n or into the field. Again personal preference.
__________________
A clinger. When guns are outlawed, only outlaws will have guns. Single Action .45 Colt (Sometimes improperly referred to by its alias as the .45 'Long' Colt or .45LC). Don't leave home without it. Ok.... the .44Spec is growing on me ... but the .45 Colt is still king.

Last edited by rclark; December 3, 2012 at 12:53 PM.
rclark is offline  
Old December 3, 2012, 05:50 PM   #27
temmi
Senior Member
 
Join Date: June 13, 2006
Location: Texas
Posts: 531
Mine is a 5.5 inch 45 Colt

I wish it was 7.5 inch tube

Still

45 Colt

Snake
temmi is offline  
Old December 4, 2012, 02:50 AM   #28
Pointshoot
Senior Member
 
Join Date: May 23, 2004
Posts: 233
As to the OP's question - - - - my favorite handgun chamberings are the 45 Colt and 44 Special. Big bullets that get the job done with little muzzle blast and little fuss. Either one is great.
I prefer the 4 5/8" barrel length; it just feels 'right' to me. But, I wouldnt turn down a 5 1/2" gun either - especially if the price was right. I prefer packin' revolvers with barrel lengths from 4" to 5 1/2" in length for the most part.
Pointshoot is offline  
Old December 5, 2012, 07:49 AM   #29
stevelyn
Senior Member
 
Join Date: May 19, 2004
Location: Fairbanksan in exile to Aleutian Hell
Posts: 2,618
My choice is the .45 Colt. If you are a reloader you can make just about anything you want.


Quote:
I really don't have a feel for what you would find in the shelf as I don't buy factory ammo.
My experience in locating .45 Colt ammo when I first bought mine was that factory ammo comes in two flavors. Poofy whiffleball loads for the cowboy action crowd with SAAs and their clones from the usual suspects, and heavy-hitters from the likes of Double Tap, Buffalo Bore, Cor-Bon, HSM and Grizzly Cartridge for the Ruger and Freedom Arms guns used for hunting and protection from large predators.

There aren't any factory loads in mid-range bullet weights and velocity to my knowledge. Factory .45 Colt also seems to be the most expensive revolver ammo out there when you take the S&W howitzer cartridges out of the mix.

To get the most out of a .45 Colt or even a .44 Special, you need to handload.
__________________
Herman Cain '12

Squished bugs on a windshield is proof the slow/heavy bullet theory works.
stevelyn is offline  
Old December 5, 2012, 02:28 PM   #30
chewie146
Senior Member
 
Join Date: October 25, 2010
Location: New Mexico
Posts: 853
Won't an ACP do everything the colt will at "poof" levels? Seems like the extra cyl is there for that, and then you use the colt for heavy hitting.
chewie146 is offline  
Old December 5, 2012, 02:39 PM   #31
dgludwig
Senior Member
 
Join Date: February 12, 2005
Location: North central Ohio
Posts: 5,182
Not one of your choices (well, in a way it is), but I'd opt for a .44 Magnum-that way, you could have your cake (.44 Magnum) and eat it too (.44 Special).
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED
...Aristotle
NRA Benefactor Life Member
dgludwig is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07770 seconds with 7 queries