The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old November 19, 2012, 11:46 AM   #1
frozenoceanfish
Junior Member
 
Join Date: November 19, 2012
Posts: 4
Factory Ammo for Rem 700CDL SF in 30-06

Good Morning,
I'm new to this site and was hoping to get some advice from you all. Yesterday I became the owner of a new Remington 700 BDL with a 24" stainless steel fluted barrel. I would like to get it zeroed quickly so I bought a couple boxes of cheap ammo to put through it for break in and I now need to get her dialed in. Does anyone with experience with this gun have a suggestion on what factory ammo to use?
Thanks in advance!
frozenoceanfish is offline  
Old November 19, 2012, 12:35 PM   #2
RamItOne
Senior Member
 
Join Date: May 24, 2011
Posts: 976
cheap ammo will help you get close, but dont forget the zero will change with different ammo, cheap ammo mostly due to inconsistent loads. i like the rem core lokt for my .308, good, not cheap not expensive. also have around 600 rounds of lake city.

there is a bolt action rifle section in this forum, perhaps a mod could move this thread to there.....
__________________
M&P- the other dark meat

https://petitions.whitehouse.gov/pet...rtant/DJyvnHz0

Last edited by RamItOne; November 19, 2012 at 12:52 PM.
RamItOne is offline  
Old November 19, 2012, 12:46 PM   #3
frozenoceanfish
Junior Member
 
Join Date: November 19, 2012
Posts: 4
thanks for the suggestion. Just to clarify, I got the cheap ammo just to put some rounds thru it, I never even tried to adjust the scope. What I am looking for is a recommendation for a couple of good factory ammo's for this gun so that I can avoid buying several different types to see which works best.
frozenoceanfish is offline  
Old November 19, 2012, 08:29 PM   #4
GeauxTide
Senior Member
 
Join Date: April 20, 2009
Location: Helena, AL
Posts: 3,067
If I was buying factory, it'd be Hornady because most of my reloads in six cartridges are under Hornady bullets.
GeauxTide is offline  
Old November 19, 2012, 08:55 PM   #5
big al hunter
Senior Member
 
Join Date: March 12, 2011
Location: Washington state
Posts: 933
Buy premium anything. Only your gun can tell you what it likes. What size groups are you hoping for? What will you be using it for? Maybe we can narrow the spectrum of choices.
__________________
You can't fix stupid....however ignorance can be cured through education!
big al hunter is offline  
Old November 19, 2012, 09:05 PM   #6
JimDandy
Senior Member
 
Join Date: August 8, 2012
Posts: 2,405
And learn to handload! You get better cartridges for less money to do more shooting!
JimDandy is offline  
Old November 20, 2012, 12:53 AM   #7
DaleA
Senior Member
 
Join Date: September 12, 2002
Location: Twin Cities, MN
Posts: 1,534
Quote:
-What will you be using it for?
Big Al nailed it. This is a very important question.

Are you hunting and if so what are you hunting? Are you a target shooter? Are you preparing for an 'uncertain' future? And at what ranges will you you be shooting?

This information will get you better answers.
DaleA is offline  
Old November 20, 2012, 07:40 AM   #8
Mobuck
Senior Member
 
Join Date: February 2, 2010
Posts: 2,189
THERE IS NO MAGIC SOLUTION TO THIS QUESTION!!!!!!!!!!!!
Each rifle will have it's own ammo preference. The only way you will know what yours likes is to try several(worst case scenario=many)brands/bullet weights/bullet types. The selection is large in the 30/06. Start out with common stuff like Hornady Custom, Remington Corelokt, or Federal. Personally, I've never had acceptable results from Winchester Super X but have from the Supreme. If you don't find a useable combination, keep trying.
For deer hunting, my choices are 150-165 grain pointed soft point or polymer tipped bullets.
I shoot a lot more handloads than factory loaded ammo but for the last 7-8 years, my deer hunting ammo for the 30/06 has been old stock Ultramax commercial reloaded 165 grain Ballistic Tips. Absolute deer hammering stuff.
Mobuck is offline  
Old November 20, 2012, 10:28 AM   #9
frozenoceanfish
Junior Member
 
Join Date: November 19, 2012
Posts: 4
Thank you for all the responses.
I'll be using this for deer hunting primarily and occassionally for Elk. My short term goal is to just get 1" (at 100yds) or better groups with a factory round.
I've reloaded shotgun shells but never rifle cartridges. A freind of mine is heavily into reloading and sometime in the Spring he is going to help me develop the best charge/bullet combo for this gun.
I appreciate all your suggestions and will be trying some of your recommended rounds Thursday morning before the family arrives for turkey.
Have a Happy Thanksgiving!
frozenoceanfish is offline  
Old November 20, 2012, 10:55 AM   #10
JimDandy
Senior Member
 
Join Date: August 8, 2012
Posts: 2,405
Let your friend teach you, let him advise you, let him walk you through the process and even kibitz on your eventual load. But load them yourself. Pick up the hobby yourself. There's a video on Youtube about an "M-16 blowing up in kids face" or some such similar. You can hear them talking crap to each other about a bunch of fail-to-fires. Before they finally blow up the gun. Nobody was hurt in the filming of that video, but it shines a light on things:

If you load your own, it's up to you to make sure you did it right. You can't blame someone else, and somone else can't blame themselves. If you load your own, you're much more concerned about the end product because it's going to be your gun, your hands, your eyes...

If you load your own you can shoot (usually) twice for each time you could have shot once. You can create a recipe better than what you can buy, using the best primer, best powder, best case, and best bullet for your gun. You can create recipes you can't find easily or at all on the shelf at your local store. So the reward of rare, better, AND cheaper more than outweighs the downside of buying equipment you can pay for in less than a year.
JimDandy is offline  
Old November 21, 2012, 07:38 AM   #11
Picher
Senior Member
 
Join Date: December 14, 2004
Location: Maine
Posts: 2,769
Try Remington Core-Loct 150-180 grain rounds. I like 150s for most deer, 165 for huge bucks weighing around 200 lbs, and think 180s are best for Elk-sized game. My son's Rem 700, 30-06, groups Core-Locts consistently 5/8" at 100 yards (Why the heck did I ever part with that rifle?).

Another good choice is Federal premiums, and Hornady premiums, but if your rifle likes Core-Locts, stick with them...they won't let you down by being too hard or too soft.

I used to like Winchester Power Points, but they're not as accurate in most of the rifles I've sighted-in for folks.
__________________
People are like rifles. Some are tried and true, having great eyes, personality, and fun to be with. Others never seem to hit the mark with you. Still others go off half-cocked. Still, it's nice to know most of them.
Picher is offline  
Old November 28, 2012, 03:31 PM   #12
frozenoceanfish
Junior Member
 
Join Date: November 19, 2012
Posts: 4
Picher, I tried the Core Lokt 165's and they worked very well. I would have tried the 150's as well but who shoots little deer
Thank you all for the suggestions!
frozenoceanfish is offline  
Old November 28, 2012, 10:20 PM   #13
boattale
Senior Member
 
Join Date: November 28, 2012
Posts: 118
My .30-06 prefers Winchester Super X 165 grain. Over any of the premium ammunition I've tried in it. Which includes Federal, Winchester and Hornady. Every rifle is different. But we all know that.
boattale is offline  
Old November 29, 2012, 12:55 AM   #14
BIGR
Senior Member
 
Join Date: June 13, 2000
Location: Mountains
Posts: 1,246
You will get many different answers on your post and all of the info will probably be helpful. Sometimes it boils down to personal preference. As far as deer hunting I have taken more deer with the 30.06 than any other caliber. For some reason I have always used 180 grain bullets and tried some 165's one time. The 180's might be more than whats needed, but most of my hunting is in thick dense woods with shots from 20 feet to maybe 80 yards if I am lucky. I must say if you do your job the 180's will put down deer like a sledge hammer. Try some good factory rounds, Federal Fusions are great, Hornady ammo and some of the others will also do just fine.

If you get set up reloading your own it will be a big plus.
BIGR is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09996 seconds with 9 queries