The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old December 2, 2012, 09:36 AM   #1
cajun47
Senior Member
 
Join Date: May 28, 2007
Location: swamp people
Posts: 539
converting the cheap #8 bird shot into slugs/buckshot.

i been watching a few of these videos on youtube.

then i wonder why don't they make these cheap slugs shells at the factory? is bird shot way cheaper to produce than a slug of same weight?
cajun47 is offline  
Old December 2, 2012, 09:47 AM   #2
jaguarxk120
Senior Member
 
Join Date: February 28, 2008
Location: Michigan
Posts: 1,947
Slugs are loaded differently, different powder and the slug weigh's less than a shot charge.

The demand for slugs is way less than regular target/game loads, so the loading factory's are geared to producing those loads first.

The slug loads are on the bottom of the list to do.

After all how many slugs do you shoot in one session?
jaguarxk120 is offline  
Old December 2, 2012, 09:50 AM   #3
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,634
To some degree, but they're also more inconsistent, prone to breakup while firing, and more difficult to load in large batches, so the lawyers would go crazy the second that anything out of the ordinary would happen. Can you imagine what would happen if someone shooting a round of skeet or trap would get one of these mixed up in their bag? Every range in the country would immediately be shut down because their range template would be too small.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old December 2, 2012, 02:34 PM   #4
Old Grump
Member in memoriam
 
Join Date: April 9, 2009
Location: Blue River Wisconsin, in
Posts: 3,144
Cajun old buddy, look elsewhere than those wax slugs and cut shells videos for shotgun tips. There is a reason most of us abhor the practice and I will bet since you brought it up the reasons will soon be listed.
__________________
Good intentions will always be pleaded for any assumption of power. The Constitution was made to guard the people against the dangers of good intentions. There are men in all ages who mean to govern will, but they mean to govern. They promise to be good masters, but they mean to be masters.
--Daniel Webster--
Old Grump is offline  
Old December 2, 2012, 02:58 PM   #5
SHR970
Senior Member
 
Join Date: January 24, 2011
Posts: 546
1) Volume of ammo sold. The bird shot is sold in MUCH higher volume.

2) Ease of manufacture. Running shot through the tower is easier than swaging slugs where amount by weight is concerned.

3) Ease of manufacture again. It is easier to load a one piece plastic wad, drop a load of shot, and fold crimp on automated equipment than it is to drop a series of cardboard and felt wads, drop in a single slug and roll crimp.
SHR970 is offline  
Old December 3, 2012, 09:46 AM   #6
cajun47
Senior Member
 
Join Date: May 28, 2007
Location: swamp people
Posts: 539
no wax or cut shells. more like the following videos. for me its for plinking at the camp, not hunting.

video:
http://www.youtube.com/watch?v=SIlmZ...5w_t2fGTH_sNmQ
cajun47 is offline  
Old December 3, 2012, 10:12 AM   #7
RedBowTies88
Senior Member
 
Join Date: October 18, 2011
Location: 609 NJ
Posts: 705
If looking for a cheap plinking slug option... I would personally go with these

http://www.youtube.com/watch?v=TfbrP7ujerE

There are extensive videos showing them on youtube with impressive results
__________________
"...with liberty and justice for all." (Must be 21. Void where prohibited. Some restrictions may apply. Not available in all states.)
RedBowTies88 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07093 seconds with 9 queries