.22LR Magpul FPG using a Marlin 60

defcon · November 14, 2012, 01:29 PM

Latest stock purchase that should come next week. Magpul FPG (Folding Pocket Gun)

Made of full polymer.

Will be using a .22LR tube fed Marlin 60 for this conversion.
Also try a AR15 CASV quad rail on it to help cover up the barrel.
Fake suppressor using PVC piping

Will post pics and video once im done with the fitment.

OcelotZ3 · November 16, 2012, 02:40 AM

So a 16" long barrel will fit in there? And the overall length is >26"?

defcon · November 16, 2012, 02:51 AM

Quote:

So a 16" long barrel will fit in there? And the overall length is >26"?

yea the barrel is 22" long

overall length will likely be over 32" long with the stock pinned to be non foldable

its good to go.

seeker_two · November 19, 2012, 11:03 PM

So...what would be the point?....

defcon · November 19, 2012, 11:43 PM

Quote:

So...what would be the point?....

its just another .22 conversion added to my collection.

seeker_two · November 20, 2012, 09:58 AM

Good point.

defcon · November 24, 2012, 10:13 PM

95% done. finished fitting it. now i have to figure out how to close it and make it secure.

it wont fold anymore. stock is fixed

41" OAL
22" barrel length

things to do:
1) the trigger guard is too short so i have to create an extension or just create a new one
2) it doesnt close all the way so i need to figure out how to close the upper part of the FMG9 to the lower part. probably will create a bracket and screw it on 3 sides
3) add Devcon steel putty on both sides of the fake can to keep it snug around the Marlin 60 barrel/tube
4) add MBUS sights
5) use a smaller EOTECH red dot clone

_MG_4290 by defconskylude, on Flickr

_MG_4291 by defconskylude, on Flickr

_MG_4287 by defconskylude, on Flickr

_MG_4289 by defconskylude, on Flickr

seeker_two · November 24, 2012, 10:21 PM

Nice!

OcelotZ3 · November 25, 2012, 02:48 AM

Ah, non-foldable. Now it makes sense.

TriumphGuy · November 27, 2012, 11:24 PM

I remember that stock when the prototype made it's rounds. Can't believe they actually brought it to market.

defcon · November 28, 2012, 12:20 PM

Quote:

I remember that stock when the prototype made it's rounds. Can't believe they actually brought it to market.

it went straight to airsoft.

TriumphGuy · November 28, 2012, 12:30 PM

Well that's decidedly less exciting.

defcon · November 28, 2012, 12:35 PM

hahaha sorry to disappoint you.

TriumphGuy · November 28, 2012, 12:37 PM

You're project is still plenty cool for sure, I was just hoping to have a chance to get my hands on a pocket sized folding carbine for a few seconds there.

November 14, 2012, 01:29 PM	#1
defcon Senior Member Join Date: July 24, 2012 Location: Los Angeles Posts: 149	.22LR Magpul FPG using a Marlin 60 Latest stock purchase that should come next week. Magpul FPG (Folding Pocket Gun) Made of full polymer. Will be using a .22LR tube fed Marlin 60 for this conversion. Also try a AR15 CASV quad rail on it to help cover up the barrel. Fake suppressor using PVC piping Will post pics and video once im done with the fitment.

November 19, 2012, 11:03 PM	#4
seeker_two Senior Member Join Date: August 31, 2002 Location: Deep in the Heart of the Lone Star State (TX) Posts: 1,543	So...what would be the point?.... __________________ Proud member of Gun Culture 2.0......

November 20, 2012, 09:58 AM	#6
seeker_two Senior Member Join Date: August 31, 2002 Location: Deep in the Heart of the Lone Star State (TX) Posts: 1,543	Good point. __________________ Proud member of Gun Culture 2.0......

November 24, 2012, 10:21 PM	#8
seeker_two Senior Member Join Date: August 31, 2002 Location: Deep in the Heart of the Lone Star State (TX) Posts: 1,543	Nice! __________________ Proud member of Gun Culture 2.0......

November 16, 2012, 02:40 AM	#2
OcelotZ3 Senior Member Join Date: March 21, 2008 Posts: 151	So a 16" long barrel will fit in there? And the overall length is >26"?

November 24, 2012, 10:13 PM	#7
defcon Senior Member Join Date: July 24, 2012 Location: Los Angeles Posts: 149	95% done. finished fitting it. now i have to figure out how to close it and make it secure. it wont fold anymore. stock is fixed 41" OAL 22" barrel length things to do: 1) the trigger guard is too short so i have to create an extension or just create a new one 2) it doesnt close all the way so i need to figure out how to close the upper part of the FMG9 to the lower part. probably will create a bracket and screw it on 3 sides 3) add Devcon steel putty on both sides of the fake can to keep it snug around the Marlin 60 barrel/tube 4) add MBUS sights 5) use a smaller EOTECH red dot clone _MG_4290 by defconskylude, on Flickr _MG_4291 by defconskylude, on Flickr _MG_4287 by defconskylude, on Flickr _MG_4289 by defconskylude, on Flickr

November 25, 2012, 02:48 AM	#9
OcelotZ3 Senior Member Join Date: March 21, 2008 Posts: 151	Ah, non-foldable. Now it makes sense.

November 27, 2012, 11:24 PM	#10
TriumphGuy Senior Member Join Date: October 5, 2009 Posts: 559	I remember that stock when the prototype made it's rounds. Can't believe they actually brought it to market.

November 28, 2012, 12:30 PM	#12
TriumphGuy Senior Member Join Date: October 5, 2009 Posts: 559	Well that's decidedly less exciting.

November 28, 2012, 12:35 PM	#13
defcon Senior Member Join Date: July 24, 2012 Location: Los Angeles Posts: 149	hahaha sorry to disappoint you.

November 28, 2012, 12:37 PM	#14
TriumphGuy Senior Member Join Date: October 5, 2009 Posts: 559	You're project is still plenty cool for sure, I was just hoping to have a chance to get my hands on a pocket sized folding carbine for a few seconds there.