|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
November 12, 2012, 06:43 PM | #1 |
Senior Member
Join Date: May 13, 2011
Location: Carolina
Posts: 3,415
|
Damage Industries AK Brake Review
I've been running the Damage Industries AK muzzle brake for a few weeks now and here's what I've found... Pros: -It works. There are some 'brakes' out there that don't do much to reduce muzzle climb outside of adding weight to the end of your barrel. -Cost. Sells for only $18. -Finish. The black oxide finish looks nice and is void of any machining marks. -Made in the USA. -Composed of 4140 steel. -Length. It's only 1.75'' and after threading it on it only adds about 1'' to your OAL. Lots of competitors' brakes out there are 2.5-3.5''. -It isn't a 'flash magnifier' like the AK-74 style brake. Cons: -It isn't quite as good at taming recoil as the 74 style brake (I'm using the brakes with proper chambers). -Only available in 14x1 LH threading currently. -It is loud; not as loud as some brakes but louder than not using one for sure. In summary, it's a very good brake for the money. Other brakes in its' price range are generally made by Tapco and don't work anywhere near as well. If you're looking for a good brake for your 14x1 AK but don't want to break the bank it's a good option. Here's a video with this brake in action and a quick discussion about it: Muzzle Brake HD Video Review Link
__________________
Mrgunsngear Youtube Channel |
Thread Tools | Search this Thread |
|
|