The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old November 1, 2012, 04:58 AM   #1
Metal god
Senior Member
 
Join Date: April 10, 2012
Location: San Diego CA
Posts: 2,056
Magpul MBUS mounted to gas block

I went to the range today . I've been wanting to do this test for awhile and I finaly had my chance

I have the sght mounted to the my gas block ( against the recmmendations of Magpul ). My plan was to fire 100 rounds quickly through the gun to get the gas block and front sight very hot .

I started by making sure the Iron sights were zeroed and then fired a five shot group ( the entire test was conducted at 50 yards ). Unfortunately I lost or misplaced that target . I can tell you they were on target about 3 MOA .( 2 low-2 high and 1 dead center )

I then fired 100 rounds in 82 seconds ( timed ) . When I finished the barrel was smoking and I could smell something that smelled alot like plastic burning Here is the front sight right after the test and the target I shot . I had the front sight down cus I was using my red dot to stay on target for the test .


Yes I know Im shooting high I was also running a test on my red=dot at the same time .


I let everything cool down and fired a five shot group again . Here is the target ( it's the group on the right ). As you can see the shots are high and to the left . Not uber bad but this is only at 50 yards . At 100 yards that would be a big time mis .


I then re-zeroed the sights and they seemed to work fine . The front sight is still solid and operates just fine but IMO it did lose zero .
__________________
As of this date 8-18-14 at 6:42am I became a proud grandfather I guess I'm officially old
Metal god is offline  
Old November 1, 2012, 05:46 AM   #2
Marquezj16
Senior Member
 
Join Date: April 3, 2011
Posts: 2,088
Cool test. I wonder how it would have done if you were using the MBUS as your sight while shooting instead of the red dot? Would it have shifted as you were shooting?

BTW, isn't it cool to know your rifle works great!
Marquezj16 is offline  
Old November 1, 2012, 10:13 AM   #3
Technosavant
Senior Member
 
Join Date: May 29, 2007
Location: St. Louis, MO area
Posts: 3,910
Did you examine the MBUS for evidence of melting?

While Magpul recommends against a gas block mount, I have yet to see anybody actually try and see exactly what it takes to melt one.
Technosavant is offline  
Old November 2, 2012, 08:14 PM   #4
Metal god
Senior Member
 
Join Date: April 10, 2012
Location: San Diego CA
Posts: 2,056
I took the sight off last night when I was cleaning the rifle . It looks good I could not see any melting or deformations . All the edges , angles and flat areas seem to be normal . There is no discoloring it seems fine as far as I can tell .
__________________
As of this date 8-18-14 at 6:42am I became a proud grandfather I guess I'm officially old
Metal god is offline  
Old November 4, 2012, 07:17 AM   #5
CDW4ME
Senior Member
 
Join Date: March 18, 2009
Posts: 623
Interesting test, thanks for posting.
__________________
No internal lock or magazine disconnect on my pistols!
CDW4ME is offline  
Old November 4, 2012, 10:44 AM   #6
bbqbob51
Senior Member
 
Join Date: November 6, 2005
Posts: 738
I bought the Magpul MBUS for my Windham Weaponry

I bought a Windham Weaponry SRC and when I picked it up at Cabela's I bought the Magpul sights and went home to mount them and sight in the rifle.
When I opened the package for the front sight I saw the warning about not mounting it on the gas block. I contacted Windham Weaponry for their opinion and a WW gunsmith emailed me and told me that he had tested the A.R.M.S. #71 polymer front sight on a gas block. The A.R.M.S. sight has the same warning about not mounting on the gas block as the Magpul MBUS sight.
Erik (the gunsmith) told me that he had slidefired 6 full 30 round magazines, one after another, before the A.R.M.S. polymer sight showed any signs of melting.
He told me that semi-auto firing would not cause any melting so the Magpul is a good low cost alternative.
bbqbob51 is offline  
Old November 4, 2012, 11:09 AM   #7
plouffedaddy
Senior Member
 
Join Date: May 13, 2011
Location: Carolina
Posts: 3,269
Good info in this test Metal God. I'm guessing we'll be referring people to this post for a long time.....
__________________
Mrgunsngear's Youtube Channel
Certified Glock Armorer
plouffedaddy is offline  
Old November 5, 2012, 01:43 AM   #8
MB21
Member
 
Join Date: November 4, 2012
Posts: 76
I put it on my gas block of my Windham SRC and it was fine. But I was breaking in the barrel and waiting for my hand guard to come. Now, it is on my hand guard, just so I don't risk anything.
MB21 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07673 seconds with 7 queries