The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old October 19, 2012, 06:26 PM   #1
TAKtical
Senior Member
 
Join Date: September 25, 2012
Location: ohio
Posts: 145
Popular holsters

I need some input from you guys about what holsters I should be making that im not right now. Im currently making holsters for all glock models, 1911's, sig 226, sig 220, j frames, k frames, all S&W M&P models, S&W 5906, M&P shield, ruger lcp, all springfield xd models, tokarev, bodyguard, and NAA 22mag. What are some popular guns that I havent listed here? Im a glock guy so I dont know much about CZ's, FN's, sigs, hk's, so it would help me out a lot if you guys could fill me in on some popular makes and models. Thanks.
__________________
Due to several differences of opinion with staff, I am choosing to no longer do business on this forum. Everyone that has a pending order will need to contact me via email at TakticalHolsters@aol.com Thanks,
-Tom&Tricia
TAKtical is offline  
Old October 19, 2012, 11:09 PM   #2
BarryLee
Senior Member
 
Join Date: July 29, 2010
Location: The ATL (OTP)
Posts: 2,657
I have no idea what the market might actually be, but I know the H&K USP line of handguns has been in production for years and is very popular. I also think there are a lot of them changing hands on the used market as Police Forces trade them for new models.
__________________
A major source of objection to a free economy is precisely that it ... gives people what they want instead of what a particular group thinks they ought to want. Underlying most arguments against the free market is a lack of belief in freedom itself.
- Milton Friedman
BarryLee is offline  
Old October 20, 2012, 04:19 AM   #3
10-96
Senior Member
 
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 3,132
There seems to be a slow emergence of holsters for Sig's 239. I won't buy another Bianchi non-duty holster, and I just can't get a warm and fuzzy over the Safariland I bought for it. Do they really expect me to think they designed that holster with the pistol any where close to the drawing board?
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day)

I'm going to use the words "clip" and "Long Colt" every chance I get. It grinds my gears to see new members attacked when we all know dang good and well what's being refered to.
10-96 is offline  
Old October 20, 2012, 05:26 AM   #4
Pistolgripshotty
Senior Member
 
Join Date: September 19, 2012
Location: Somewhere out there
Posts: 184
Fobus is my personal preference.
__________________
12 Gauge Fury!
Pistolgripshotty is offline  
Old October 20, 2012, 09:17 AM   #5
jmhyer
Senior Member
 
Join Date: June 19, 2012
Location: Mississippi
Posts: 136
Don't own them myself, but the compact Kahr and Kel Tec pistols are very popular.
jmhyer is offline  
Old October 20, 2012, 08:49 PM   #6
Miketodd04
Member
 
Join Date: June 15, 2007
Location: Northwest Indiana
Posts: 98
I would say the popular pocket holsters. Shield, XDS, Sig p238 and P938 just off the top of my head. Also Sig 1911's are getting popular and on the custom line, the top of the slides are a little more square.
Miketodd04 is offline  
Old October 20, 2012, 09:15 PM   #7
Creeper
Senior Member
 
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
Hi ya' TAKtical...

The current model Steyr and Caracal handguns are becoming quite popular and there are few holster makers... those would be the guns I'd be looking at if I were a maker looking at emerging markets.

Another area of consideration is the increasing popularity of handguns that come, or are fitted with threaded barrels. Examples that are also fit with tall "suppressor sights" would be the ones, specifically I'm referring to. The Nighthawk AAC 1911 and FN .45 Tactical come to mind as production examples.
The "option" for a taller sight channel to accommodate suppressor sights would, at least for a time, set you apart.

Cheers,
C
__________________
Shoulder Drive Nicholson Club
Creeper is offline  
Old October 20, 2012, 10:23 PM   #8
TAKtical
Senior Member
 
Join Date: September 25, 2012
Location: ohio
Posts: 145
Thanks. I recently ordered a caracal. All of my holsters will accommodate suppressor sights. I figure its best to make them all that way in case someone decides to add taller sights later. Unfortunately for me and the FN fans, Rings (the blue gun manufacturer) has a very limited selection of FN's. As of right now I believe they are only offering a mold for FN Five-Seven.
__________________
Due to several differences of opinion with staff, I am choosing to no longer do business on this forum. Everyone that has a pending order will need to contact me via email at TakticalHolsters@aol.com Thanks,
-Tom&Tricia
TAKtical is offline  
Old October 27, 2012, 08:51 PM   #9
hawkeye1142
Junior Member
 
Join Date: May 19, 2010
Location: Mississippi
Posts: 5
I'm having a hard time finding an affordable holster for a Sig Sauer 1911 Ultra Compact.
hawkeye1142 is offline  
Old October 28, 2012, 10:49 AM   #10
Yung.gunr
Senior Member
 
Join Date: November 11, 2010
Location: Phoenix area
Posts: 1,311
My brother recently got an FNP9 and asked for ideas on holsters. Looks like there is not much out there for it. But, from my understanding that model has been discontinued so maybe there won't ever be much market for it.

Sure is a nice gun though.

I agree the pocket autos seem to be quite popular now days. The Sig 938 is probably a good one you will see some demand for. I feel it's too big for the pocket so next logical place is IWB. LC9 and others in their size category too I would think.
Yung.gunr is offline  
Old October 31, 2012, 07:50 AM   #11
2000ShadowACE
Member
 
Join Date: June 24, 2012
Location: Eastern Iowa
Posts: 69
There are very few holsters available for Taurus full sized autos like the OSS. I'm currently looking for two of them.
__________________
We have nothing to fear, but politicians.
2000ShadowACE is offline  
Old October 31, 2012, 12:23 PM   #12
plouffedaddy
Senior Member
 
Join Date: May 13, 2011
Location: Carolina
Posts: 3,220
CZ 75 holster is probably a good idea since there are so many knock offs of the gun and most fit the same holster (for instance my EAA Witness rides in a CZ holster).
__________________
Mrgunsngear's Youtube Channel
Certified Glock Armorer
plouffedaddy is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:06 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09783 seconds with 9 queries