The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 19, 2012, 08:05 PM   #1
gundoc1
Junior Member
 
Join Date: March 2, 2009
Posts: 8
mauser sporter help

I have this Mauser sporter in 30-06 was my dads hhunting rifle at one time it had a 3x9 scope on it ,it has since gone away. I am looking for a scope that fits the weaver side mount and rings it already has on it , no I aint drillin more holes in it for top mounts too damn high my friend has a set up like that and its uncomfortable as hell. I tried a bushnell 4x40 and the lense bell lays on the barrel so it obviously must be smaller than a 40 mm, I also tried a weaver V-4.5 variable and it is too short?? the bolt gets into it with the occular bell and the lo mount safety dont like it either. what should I do?? here are some pics at photobucket for reference. thanks in advance Dave.

http://s259.photobucket.com/albums/hh319/courierdubois/
gundoc1 is offline  
Old October 19, 2012, 09:37 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,979
I did a quick check and all the variables I see have objective lenses at least 40mm. If you are willing to settle for a fixed power, you should have no problem.

You also might check with a local gun shop or write the major scope makers for their catalogs.

Jim
__________________
Jim K
James K is offline  
Old October 21, 2012, 02:16 PM   #3
natman
Senior Member
 
Join Date: June 24, 2008
Posts: 1,487
It's unfortunate that that mount was chosen rather than top mounts, but since it's been done I wouldn't change it either. Try one of these:

http://www.midwayusa.com/product/614...-reticle-matte

It's a rather short scope, so you make sure it's possible to mount it with proper eye relief. Otherwise, it's an excellent scope and the magnification range is ideal for all around hunting. The 2x is great for brush and woods and if a deer is too far away to hit with 7x, it's too far away, period.
natman is offline  
Old October 23, 2012, 09:10 AM   #4
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,443
Ditto what Natman said,that's the scope I would try also.
__________________
Thanks for coming!
hooligan1 is offline  
Old October 23, 2012, 03:28 PM   #5
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,533
It looks like that rifle was set up for a rather longish scope like the old Weavers or Redfields from the late 60s-early 70s. With the ring spacing you have on that side mount, you will need a long scope if you want to use the same mounts. Or you may be able to find a different ring setup that will hold a horter scope far enough back to be usable.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old November 3, 2012, 12:51 PM   #6
tahoe2
Senior Member
 
Join Date: August 13, 2011
Location: Seattle area
Posts: 539
saw one of those long weavers on ebay about a week ago. don't remember if it was a variable or not.
tahoe2 is offline  
Old November 4, 2012, 10:06 AM   #7
michaelcj
Senior Member
 
Join Date: June 15, 2011
Location: Lopez Island, WA
Posts: 125
A Leupold 1.5X5 with a 20mm objective would be a possible choice and would "look" great on that rifle. Very happy with mine.
MJ
michaelcj is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07348 seconds with 7 queries