The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Thread Tools
Old October 15, 2012, 04:47 AM   #1
Junior Member
Join Date: June 11, 2009
Posts: 3
Where can I find a laser mount for a tiny rail?

I picked up one of those tiny derringers for the hell of it, but now I'm curious what kind of accuracy I can actually get out of this, so I'd like to mount a laser sight to it. Or maybe a scope. But that'd be just for laughs, followed by jaw drops at the range. It's double barreled, chambered in .22LR, but I plan on buying a .25 or .32 barrel for it.

Here's the gun:

So there's a rib running along the top. I measure it at about 5/32" wide (I don't have my calipers to check the narrow parts). A laser sight that clamps on this would be ideal.

My other option is to get a laser bore sight. That'd require one of the other sizes, and use up one of my barrels, so that's more of a plan B.

Any other ideas, or anyone know where I can find a laser sight that'll clamp on that tight?
Shaftway is offline  
Old October 15, 2012, 07:18 AM   #2
Double Naught Spy
Senior Member
Join Date: January 8, 2001
Location: Forestburg, Montague Cnty, TX
Posts: 10,871
You could try a 3/8" mount, though the rib is 1/32" smaller. You might have to remove a bit of material from the mount so that it will close more tightly and hence be able to grip the 5/32" rail, likely AFTER you remove some metal for the mount to grip the rib/rail, or from the mount, as I doubt you will find a mount that will just fit the cutouts only.
"If you look through your scope and see your shoe, aim higher." -- said to me by my 11 year old daughter before going out for hogs 8/13/2011
My Hunting Videos
Double Naught Spy is offline  
Old October 16, 2012, 10:29 PM   #3
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
Call Brownells.
On the phone; ask for tech help.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  

derringer , laser sights

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06719 seconds with 9 queries