The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

View Poll Results: Are they worth it?
yes 33 64.71%
no 18 35.29%
Voters: 51. You may not vote on this poll

Reply
 
Thread Tools
Old October 15, 2012, 07:51 PM   #26
kmaysob
Senior Member
 
Join Date: December 9, 2011
Posts: 187
i picked my vortex viper up for $459 last december. i had originally planned on a vx3 until i compared them. and at $500 less than the vx3 i was sold. it does have less eye relife, but it had never been an issue on my 308.
kmaysob is offline  
Old October 15, 2012, 11:13 PM   #27
SerenityNetworks
Senior Member
 
Join Date: February 13, 2012
Location: Allen, TX
Posts: 304
Quote:
Originally Posted by wpsdlrg View Post
...They also don't make many other parts that go into their scopes. The glass they get from NIKON - (the Nikkor division, which makes all of Nikon's glass). So, a Leupold scope, despite their extravagant claims, has no better glass in it than a Nikon Monarch. It's the SAME glass...
I totally agree, up to this point, which I'm not sure is correct. This is why...

Back in the late 60's and early 70's I was quite involved with photography. At that time it was also common practice for one manufacturer to make lenses for several companies. The quality of the lens was determined by placing the finished lens in a mold that 'perfectly' matched the shape of the lens. Where the lens did not perfectly conform to the mold, the defects could be detected by curved shadows &/or rings that appeared when light was shown on the glass from the correct angle. A lens that had less than three defects might go to Leitz (who paid a premium for the extra quality), a lens with less than five defects might go to Pentax (who paid less), a lens with less than seven defects might go to Kodak who paid the least, and anything more would be recycled. With multiple lenses being incorporated into any given optic, an increase in the number of defects rapidly impacted the quality of the final product. (This is a simplified, yet essentially correct, explanation of the process and how different manufacturers got different lots of lenses from the same manufacturer. The numbers and companies are purely arbitrary and are only for illustration of the concept. I've long forgotten the real numbers and company relationships.) But this very process also allowed for some lesser cost optics to come out great. For example, a Leitz optic with seven elements might have a total of say 18 defects. But if Leitz already had their lot fulfilled, some of those three-defects-or-less lenses might go into a Pentax. A 'lucky' Pentax optic might end up with less defects than an 'unlucky' Leitz optic. This process also meant that there would be variations of quality for any given model of optic for a given company.

Once I had made the decision to purchase a lens (optic) that would cost me several hundred dollars (a lot of money in the 60's/70's), then I would go to a camera store that had at least 1/2 dozen of that lens in stock. I would promise the owner/manager that I would be buying one of his lenses. Then I would go during slow or off hours with my camera and take two or three pictures of the same scene in the same light conditions (each having a note or something in the scene that would identify which lens was being used). Then I would have the film quickly developed and without any corrections being made to the prints. With just a simple examination, it was almost always evident that one or two of the lenses were optically superior to the others. That is the one I would buy. - One time I got a difference with a single lens that was just WOW! That was the 'lucky' Pentax lens that had the Leitz quality; and you bet I bought it!

I suspect the quality techniques used today are much more sophisticated and automated than laying a lens in a mold and counting defects. But I would be surprised if the distribution of quality has changed. It may even be exact to the point that if a company doesn't pay for the quality then they just don't ever get it. That is, no 'lucky' optics any more.

So to wrap up a long story, I highly suspect that Leupold pays for higher quality lenses than Nikon. Therefore even though Nikkor makes lenses for both companies, a Nikon scope is likely not of the same quality as a Leupold scope.

This is of course speculation, but it is based upon what I have known to be true in the past.

Unfortunately, given all the sealed packages, I doubt if any store is going to let me open a half dozen scope boxes and pick the one where the image 'jumps out' at me. I just have to buy from the manufacturer whose quality meets my need (and hope I get a good one).

Regards,
Andrew

NRA Life Member
------------------------
"There are some ideas so preposterous that only an intellectual will believe them." - Malcolm Muggeridge
SerenityNetworks is offline  
Old October 15, 2012, 11:30 PM   #28
Rob228
Senior Member
 
Join Date: May 29, 2010
Location: Broomfield CO
Posts: 574
I've slowly been converted to Leupold scopes. I carried a LR/T on an M14 during a rather interesting deployment, beat it up pretty badly, and it always held its zero. I now have the same scope sitting on a .243 that I built. Even with the 40% military discount I got from them, the rifle is the single most expensive thing on this rifle, and I would not change that. Looking through good glass then looking through cheap glass will really open your eyes. I can dial the adjustments all the way up, down, left and right on this scope and when I turn the back to 0 the rifle will shoot exactly where it is supposed to. Repeatability is TREMENDOUS with a scope and the cheaper ones are severely lacking here.

I apologize for the grainy cellphone pic.

Rob228 is offline  
Old October 16, 2012, 10:27 PM   #29
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,250
how do you like me now?

I shoot handguns only; none wear glass.

Of course we balance cost with need, but good glass is a given.
Isn't it?
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old October 20, 2012, 05:42 PM   #30
TheNatureBoy
Senior Member
 
Join Date: September 6, 2007
Posts: 1,183
Are they worth it? Depends. If I am in a combat situation then a big money scope is definitely worth it! Otherwise I think I can get by with one that holds zero and has good glass. A good scope won't make you a good shooter. I've visited a number of websites and read posts that suggest otherwise though. I'll take a skilled shooter with a $400 setup any day over one with a big money rig and limited ability/skills.
TheNatureBoy is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08523 seconds with 8 queries