When did Bushnell make the "Scope Chief" series?

coyota1 · October 8, 2012, 09:03 PM

I would like to know when Bushnell made the Scope Chief series scopes. I am exploring the idea of a vintage scope for my 722, but I don't want to get something too antiquated.

PetahW · October 8, 2012, 09:48 PM

It'd be hard to find a scope "too antiquated" for your rifle, which model was started being made prior to the time that scopes first became widely popular in the US (early-mid 1950's).

Your rifle was made between 1948-61 IIRC, and the Scopechief in the mid-70's.

.

coyota1 · October 8, 2012, 09:55 PM

OK, I meant too antiquated for a scope, period. I think the rifle was made in 55, but the scope is made in the 70's? I like the looks of old Weavers K series, and similar, but I don't want to short change myself with inferior optics just to get the look.

PetahW · October 8, 2012, 10:03 PM

Just about everyone I knew that had a Remington 721/722 in the 50's & 60's had a steel tubed Weaver K-series on it.

.

old roper · October 9, 2012, 09:25 AM

here is something on Scope Chief

Dave Bushnell got into the scope business in 1948, with 400 Japanese binoculars he thought he could sell in the U.S. Alas, many orders were canceled when a shipping strike held up delivery. With his last $200, Dave bought a small ad in Sports Afield—and sold 54 binoculars for $648. It proved to be the boost he needed. His first year as an optics importer brought in almost $150,000. By 1960, more than 18,000 dealers worldwide carried Bushnell products. Three years later he introduced a Scopemaster riflescope line: 2.5X, 4X and 6X models with internal adjustments and coated optics. Renamed ScopeChief, the series improved to emerge as ScopeChief II in 1965. A forward prism enabled the reticle to remain fixed in the second focal plane. A “Command Post” gave you the choice of crosswire or post.

coyota1 · October 9, 2012, 09:36 AM

Well, this scope says ScopeChief, I don't see a "II" anywhere on it, but I'm only looking a a pic. I don't have the gun yet, I am having it shipped. Hopefully by the end of the week. The problem is it is a 4x. A 222 needs a 3x9 to take full advantage of it's range, although I wouldn't mind a fixed 6x Weaver, or something similar if the quality of the optics were up to par.

Lloyd Smale · October 9, 2012, 03:41 PM

ive got a couple 2.5x8 scopecheifs left I used to buy them all the time back in the 70s and 80s. They were about as good as you could buy back then. baush and lomb made there glass and coatings. They still arent all that bad by todays standards opticaly. At least there still competive against scopes in the 100-200 dollar range they werent really a cheap scope in the day. I think i used to pay a 100 bucks for them back in the late 70s which would probably equate to about a 3 or 400 dollar scope today. The two i have left have served me well for many trouble free years and even have seen time on some heavy kicking guns.

coyota1 · October 9, 2012, 04:34 PM

I like the "vintage" look for the 722, but 4x is not quite enough scope for the 222, however, I can see quite a bit at 300 yrds with it. I would be interested in a 2.5 x 8 if I run across one. Especially since they were a higher end scope in their day as you stated.

coyota1 · October 12, 2012, 09:22 PM

Quote:

A forward prism enabled the reticle to remain fixed in the second focal plane

old roper, I now have the rifle, and the scope and it says "Scope Chief" only. I notice the reticle is slightly off center. Is this scope adjusted by moving the cross hair? I plan on going to the bench soon, but this weekend looks like wind and rain.

MOshooter65202 · October 12, 2012, 11:36 PM

My Dad has a Remington 721 280 Rem. which he bought new in the late 50s or early 60s,it still has the first scope a Bushnell Scope Chief that he bought when he purchased the rifle.
The scope has what they called a "command post" a thicker vertical post from the bottom to center of the crosshairs,the command post could be adjusted out of view for finer precision shooting with just the fine crosshairs. This scope would be the correct "Age Era" for a Remington 721 or 722

coyota1 · October 13, 2012, 01:55 AM

I've heard of this command post reticle. Mine has just the fine crosshair. I did mess with the adjustments, and the reticle does move with adjustment. I might just keep it on the rifle even being 4x. I can see quite a bit down range.

October 8, 2012, 09:03 PM	#1
coyota1 Senior Member Join Date: April 6, 2008 Location: West Michigan Posts: 656	When did Bushnell make the "Scope Chief" series? I would like to know when Bushnell made the Scope Chief series scopes. I am exploring the idea of a vintage scope for my 722, but I don't want to get something too antiquated.

October 9, 2012, 09:25 AM	#5
old roper Senior Member Join Date: June 11, 2007 Posts: 691	here is something on Scope Chief Dave Bushnell got into the scope business in 1948, with 400 Japanese binoculars he thought he could sell in the U.S. Alas, many orders were canceled when a shipping strike held up delivery. With his last $200, Dave bought a small ad in Sports Afield—and sold 54 binoculars for $648. It proved to be the boost he needed. His first year as an optics importer brought in almost $150,000. By 1960, more than 18,000 dealers worldwide carried Bushnell products. Three years later he introduced a Scopemaster riflescope line: 2.5X, 4X and 6X models with internal adjustments and coated optics. Renamed ScopeChief, the series improved to emerge as ScopeChief II in 1965. A forward prism enabled the reticle to remain fixed in the second focal plane. A “Command Post” gave you the choice of crosswire or post. __________________ Semper Fi Vietnam VFW

October 8, 2012, 09:48 PM	#2
PetahW Senior Member Join Date: September 19, 2008 Posts: 3,278	It'd be hard to find a scope "too antiquated" for your rifle, which model was started being made prior to the time that scopes first became widely popular in the US (early-mid 1950's). Your rifle was made between 1948-61 IIRC, and the Scopechief in the mid-70's. .

October 8, 2012, 09:55 PM	#3
coyota1 Senior Member Join Date: April 6, 2008 Location: West Michigan Posts: 656	OK, I meant too antiquated for a scope, period. I think the rifle was made in 55, but the scope is made in the 70's? I like the looks of old Weavers K series, and similar, but I don't want to short change myself with inferior optics just to get the look.

October 8, 2012, 10:03 PM	#4
PetahW Senior Member Join Date: September 19, 2008 Posts: 3,278	Just about everyone I knew that had a Remington 721/722 in the 50's & 60's had a steel tubed Weaver K-series on it. .

October 9, 2012, 09:36 AM	#6
coyota1 Senior Member Join Date: April 6, 2008 Location: West Michigan Posts: 656	Well, this scope says ScopeChief, I don't see a "II" anywhere on it, but I'm only looking a a pic. I don't have the gun yet, I am having it shipped. Hopefully by the end of the week. The problem is it is a 4x. A 222 needs a 3x9 to take full advantage of it's range, although I wouldn't mind a fixed 6x Weaver, or something similar if the quality of the optics were up to par.

October 9, 2012, 03:41 PM	#7
Lloyd Smale Junior member Join Date: February 11, 2005 Posts: 822	ive got a couple 2.5x8 scopecheifs left I used to buy them all the time back in the 70s and 80s. They were about as good as you could buy back then. baush and lomb made there glass and coatings. They still arent all that bad by todays standards opticaly. At least there still competive against scopes in the 100-200 dollar range they werent really a cheap scope in the day. I think i used to pay a 100 bucks for them back in the late 70s which would probably equate to about a 3 or 400 dollar scope today. The two i have left have served me well for many trouble free years and even have seen time on some heavy kicking guns.

October 9, 2012, 04:34 PM	#8
coyota1 Senior Member Join Date: April 6, 2008 Location: West Michigan Posts: 656	I like the "vintage" look for the 722, but 4x is not quite enough scope for the 222, however, I can see quite a bit at 300 yrds with it. I would be interested in a 2.5 x 8 if I run across one. Especially since they were a higher end scope in their day as you stated.

October 12, 2012, 11:36 PM	#10
MOshooter65202 Senior Member Join Date: February 16, 2011 Posts: 428	My Dad has a Remington 721 280 Rem. which he bought new in the late 50s or early 60s,it still has the first scope a Bushnell Scope Chief that he bought when he purchased the rifle. The scope has what they called a "command post" a thicker vertical post from the bottom to center of the crosshairs,the command post could be adjusted out of view for finer precision shooting with just the fine crosshairs. This scope would be the correct "Age Era" for a Remington 721 or 722

October 13, 2012, 01:55 AM	#11
coyota1 Senior Member Join Date: April 6, 2008 Location: West Michigan Posts: 656	I've heard of this command post reticle. Mine has just the fine crosshair. I did mess with the adjustments, and the reticle does move with adjustment. I might just keep it on the rifle even being 4x. I can see quite a bit down range.