The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old October 4, 2012, 03:10 PM   #1
ELMOUSMC
Senior Member
 
Join Date: June 26, 2007
Location: N.E.IOWA
Posts: 360
Rossi model 92 .38/.357 carbine feedback

I spend quite a bit of time wandering the river valleys and hollows here in N.E. Iowa and and often I will kick a coyote out.I have carried a lot of different gun from pistols(useless for me) shotguns,.22 semi autos,Ars ect
A friend has a Rossi md 92 16in carbine in .38/357 its a handy little lever gun that weighs6+ lbs,he swears by it and carries it every where
Iam hoping some of you all have some experience with this gun and could give me some feed back on quality,fit,finish and reliablity.The 1 my friend has is about 10 years old and it looks like it was used as a fence stretcher any imput would be great
__________________
USMC 1965-1992 For God,Country,Corps
ELMOUSMC is offline  
Old October 4, 2012, 03:57 PM   #2
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
IMHO, your friend's already given you the best feedback/reference available - they're a no B.S. using gun, slicker than a green snake and handier than an extra arm.


.
PetahW is offline  
Old October 4, 2012, 04:55 PM   #3
gak
Senior Member
 
Join Date: February 28, 2005
Location: Aridzona
Posts: 2,767
what he said. Cosmetically I like the older ones better and functionally the no safety ones as well, which were all the Interarms era (late 70s/early 80s to early 90s, EMF "Hartfords" up 'til '06, and the few Navy Arms variants out there. LSI (Legacy Pumas, which "replaced" Interarms, all had the fukakata safety as do all the current Rossis (under Braztech/Taurus ownership). (The safety does have a "fix" out there, however).

But...I'll take a Rossi in any form. Early ones 'til the factory retooling in 2000 or so were said by many to be a little rough out of the box. True of some, not of others. For those that required smoothing, shooting and/or dry levering usually did the trick, or Steve Young (aka Nate Kiowa Jones) of www.stevesgunz.com, can help directly with one of his tune ups (or above safety "fix"), or with a DVD and parts he sells. NKJ's the acknowledged 92 guru.

All 'n all, like their Winchester forebearers, Rossis are very handy - light, and smooth with a very strong action. The 20" carbine is my overall favorite and the one I'd have if you can have only one, but the little 16" trapper sure is handy.
gak is offline  
Old October 4, 2012, 08:43 PM   #4
sgms
Senior Member
 
Join Date: May 30, 2010
Location: Arizona or Ohio depending
Posts: 745
One of my favorite walking (non bear area than gets a .45-70) around rifles.
sgms is offline  
Old October 4, 2012, 09:01 PM   #5
smee78
Senior Member
 
Join Date: July 14, 2008
Location: South Carolina
Posts: 972
I also have one of the Rossi (Interarms) guns and it is a great gun, mine is a pre safety model. It is light weight and fun, I love to run 38spl loads out of mine for a fun all day shooting. I believe you could do alot worse for a good run about gun. I also picked up one in 45LC and could not be happier.
__________________
We know exactly where one cow with Mad-cow-disease is located, among the millions and millions of cows in America, but we haven't got a clue where thousands of illegal immigrants and terrorists are
smee78 is offline  
Old October 6, 2012, 08:23 AM   #6
bull0117
Member
 
Join Date: January 14, 2012
Posts: 17
I have one in 44 mag and it's the best gun I have purchased given the low price and high fun factor. Super reliable and much more accurate than I was thinking it would be. Busting little clays at 70 yards is pretty easy. Plus mine feeds any bullet profile I've tried including semi-wadcutters.
bull0117 is offline  
Old October 6, 2012, 02:14 PM   #7
Deja vu
Senior Member
 
Join Date: March 14, 2010
Location: Border of Idaho & Montana
Posts: 2,091
I thought about getting one. My son wants to steal my marlin 1894 trapper. When and if that happens that leaves me with out my favorite deer harvesting rifle. I have looked at the Rossi but had the guy behind the counter tell me they are junk... it nice to hear that guy may be wrong.

Still I am wanting a Winchester Trapper.

Is there not any 357 magnum carbines made in America any more?
__________________
Shot placement is everything! I would rather take a round of 50BMG to the foot than a 22short to the base of the skull.

all 25 of my guns are 45/70 govt, 357 mag, 22 or 12 ga... I believe in keeping it simple
Deja vu is offline  
Old October 6, 2012, 10:38 PM   #8
gak
Senior Member
 
Join Date: February 28, 2005
Location: Aridzona
Posts: 2,767
Lever-wise, no American-made Winchesters any more, and when they were they were just 94s, no 92s. AFAIK, there has NEVER been an American-factory Win 92 made in .357, period--or in any other calber since 1941. Model 94s are another matter, made here 'til the Connecticut plant closed eight or ten (?) years ago,...and from many posts in this and other forums, .357 is not a good chambering (yes, some report no problems). The 94 was not designed for "pistol-length" rounds in the first place, but the larger bores among them supposedly fare better than the .357. Stick with the Japanese (Miroku plant) Win 92 if you must have Winchester---though far from cheap. Same plant that made the stellar Browning 92s--which are getting precious in .357 especially (lower production than the .44s). Otherwise, another American made .357 would be Marlin. I'd pick an older Marlin before a Win 94 or Henry (too heavy) in this chambering.
gak is offline  
Old October 7, 2012, 12:58 AM   #9
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 4,267
No 92 but a Marlin

Do't have a Rossi 92 but do have a Marlin .357. The .357 lever carbines are indeed handy and useful shooters and mine gets steady use as a GP and walking abouit rifle. I shoot mine better than any handgun, and the .357 ctg gets a useful boost from carbine length barrels. Loaded down to .38 power, or simply shoot .38 in you don't load, and the carbine is no more trouble to shoot for beginners than a .22.

You will not go wrong w/ a .357 lever carbine.
bamaranger is offline  
Old October 8, 2012, 08:51 AM   #10
az_imuth
Senior Member
 
Join Date: September 27, 2008
Posts: 231
I have one of the rossi 38/357's with a longer 24' barrel and I absolutely love it. It was a little stiff right out of the box, but not bad at all and after working the action a bit it smoothed up real nice. The sights were dead on with 38's and I can get nice little groups out at 50 yds. Haven't tried grouping it any further than that yet. Fit and finish is great for such an inexpensive rifle and it is loads of fun to shoot. I imagine one of the 16 or 20 inch versions would be quite handy to carry around.
az_imuth is offline  
Old October 8, 2012, 10:31 AM   #11
CCCLVII
Senior Member
 
Join Date: April 16, 2012
Location: Idaho
Posts: 295
I have a Rossi in 38/357 and it is not as smooth as the older Marlins and Winchesters. Mine works fine but If you are looking for smooth and perfect fit I think you may be a bit disappointed.

I guess you get what you pay for... unfortunately there is no such thing as a 357 magnum lever gun made in America any more. (as far as I know)
__________________
Always looking for a good hunt!
CCCLVII is offline  
Old October 8, 2012, 10:47 AM   #12
45_auto
Senior Member
 
Join Date: November 21, 2011
Location: Southern Louisiana
Posts: 560
I've had a Rossi 357 carbine for several years now. The ABSOLUTE BEST thing you can do if you own one is to do the action job (or get it done) described on the Stevesgunz DVD referenced in Post #3.

It will make the Rossi the slickest lever action you have ever worked.
45_auto is offline  
Old October 11, 2012, 10:25 PM   #13
warnerwh
Senior Member
 
Join Date: February 11, 2009
Posts: 278
I have been impressed by the 38/357 Rossi with a 16" barrel I recently purchased. With little effort and some different springs you can do an action job which makes it about as smooth as any other lever gun. There never was any roughness even when new. I also lightened the trigger pull considerably. Btw the trigger pull was nice and crisp with very little over travel. This gun will shoot 1 1/16" and 1 1/4" groups with 2 different bullets at 50 yards and with older eyes and iron sights. It didn't take but a few different loads to try to get what I consider satisfactory accuracy.

I've only taken it out 4 times and functioning is perfect. I tried some SWC loads for the heck of it and it stumbled a bit but usually fed them. Other bullets not a single issue feeding. I have used Remington 125gr jhp, Zero 125 gr jhp and Speer 125gr tmj bullets.

The fit and finish is good with wood to metal. The quality of the parts fit is good with no slop. The wood on the stock is stained. I used a museum quality wax which removed some stain and lightened the color. You can see the grain of the wood and it looks much better.

I've read you need to look them over before you buy one but other than that I'm very pleased with it and will buy one in .44 now. From what I can tell from reading especially at the Marlin Owner's forum the Rossi is the better choice over a new Marlin. Apparently there have been alot of bad Remlins released. Those guys report seeing numerous Remlin lever guns that should not have made it out the door for sale.
__________________
Portland, Or
warnerwh is offline  
Old October 12, 2012, 01:24 PM   #14
Nanuk
Senior Member
 
Join Date: January 2, 2005
Location: Where the deer and the antelope roam.
Posts: 1,690
Rossi's are great lil rifles. That said I sold mine because I had trouble getting my thumb in the loading gate to load. I much prefer the marlin for that.
__________________
My rifle and pistol are tools, I am the weapon.
Nanuk is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09602 seconds with 7 queries