The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 1, 2012, 02:16 PM   #1
fastline
Junior Member
 
Join Date: July 31, 2012
Posts: 6
Help with custom Rem 700 action or other host action

My apology for the double post up in general chat. I really should have posted this in the smithy area since this is custom work. Don't hate me...

I want to start work on a custom .500 whisper project. I will be slinging very heavy slugs at subsonic velocities. Due to the brass that I was going to use, I was going to use an action I already have which is a 700 short in .222. The bolt face is right, the price is right (free), etc BUT the action is not long enough, I need to accommodate a 3.0-3.1" cartridge which means I will have to heavily mod the 700 short.

The thought came to mind to see if I can just sell my complete .222 rifle and get a new 700 long with a .222 or .223 (same) bolt face? I have no need to buy new but not sure which direction to go. I will list a few specifics that I need. I should mention that I own a machine shop so some mods including the barrel chambering and threading will be done here.

1. Must be an action that I can get parts for, 700 seems perfect here
2. Must be able to mod the action for clip and make or buy removable mags
3. Common enough geometry that I can find a tactical stock to work.
4. CHEAP. Build is on a budget but I don't need junk.
fastline is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05125 seconds with 7 queries