The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old September 30, 2012, 07:30 PM   #1
stu925
Senior Member
 
Join Date: December 20, 2010
Location: New York
Posts: 945
S&W 66-2

So a friend of mine has an S&W M66-2 with a 2 1/2" bbl that he's looking to sell. I looked at it today to try and give him an idea what he should try to get for it. It's a nice piece but could use a little love needs a thorough cleaning and a new set of grips since the gun show cheapies he put on it 10 years ago don't fit right. It does however lock up nice and tight, no frame cut over top of the forcing cone, no discernible play in it at all. At some point someone had the side plate off it but it's not boogered up too bad. There's a faint turn line on the cylinder but I doubt this gun's seen 200 rounds. Wasn't cleaned the last time it was fired though which was quite some time ago. In any event, I got looking at completed auctions on gun broker and noticed the prices were all over the map. I was thinking somewhere in the neighborhood of $600 since there's no box or papers and the tool kit is long gone. What say ye? Too much or too little, what would you be willing to pay for a shooter grade 66-2?

Stu

Last edited by stu925; September 30, 2012 at 07:31 PM. Reason: forgot to include barrel length
stu925 is offline  
Old September 30, 2012, 07:34 PM   #2
rjrivero
Senior Member
 
Join Date: November 17, 2008
Location: NW Ohio
Posts: 1,349
Snub nosed 66's seem to be getting a little more than the 4 or 6" barrels. I would be willing to pay $600 for such a firearm if the grips were factory and the gun was pristine. But with aftermarket grips, and obvious signs of the side plate having been removed, I would probably offer $500 or so. Just me.
rjrivero is offline  
Old September 30, 2012, 07:50 PM   #3
smokin54
Senior Member
 
Join Date: January 7, 2005
Posts: 193
I would think as described you could ask $500 and expect to have to go lower . the model 66 is a personal favorite and is my home defense . A few years back I decided to thin out some of my 357s and the 2 i kept were the 66 and a Freedom arms.
smokin54 is offline  
Old September 30, 2012, 10:20 PM   #4
JC57
Senior Member
 
Join Date: September 2, 2010
Posts: 249
500 for a person to person transaction would be reasonable.
JC57 is offline  
Old September 30, 2012, 10:46 PM   #5
Webleymkv
Senior Member
 
Join Date: July 20, 2005
Location: Indiana
Posts: 9,901
I bought mine about six years ago for $360.



That being said, the prices of revolvers have increased quite dramatically over the past 5-10 years as the inexpensive police trade-ins have dried up. This is particularly acute with S&W K-Frame Magnums as they are no longer produced (the M66 was the last to go being discontinued in 2005). In my area, a used but not abused M66-2 with a 2 1/2" barrel, aftermarket stocks, and no box or papers would be priced fairly at $500 with a price as high as $600 not being entirely unreasonable for a particularly nice specimen.
__________________
Smith, and Wesson, and Me. -H. Callahan
Well waddaya know, one buwwet weft! -E. Fudd
All bad precedents begin as justifiable measures. -J. Caesar
Webleymkv is offline  
Old October 1, 2012, 04:02 AM   #6
AKsRul.e
Senior Member
 
Join Date: July 24, 2010
Location: Pennsylvania
Posts: 234
NY laws are very restrictive on individuals selling handguns.

This keeps the supply down and demand up.

Thus NY prices are usually higher than the national average.

IMHO $550 is a fair NY price for that particular gun.
AKsRul.e is offline  
Old October 1, 2012, 12:23 PM   #7
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,354
The model 66-2 is a desireable gun .....but in my area, the 4" models demand a premium...

... but the prices on good S&W revolvers in my area are up as well ...and today, I think something in the $ 450 - $500 range is about right...you can replace the grips for $ 50 - $75 or so ...so I'd factor that into the deal ....but if its a good buddy / and you want the gun I wouldn't quibble over $ 50 - $100 either...
BigJimP is offline  
Old October 1, 2012, 06:56 PM   #8
stu925
Senior Member
 
Join Date: December 20, 2010
Location: New York
Posts: 945
Thanks for the replies guys. I thought $600 might be a bit high but figured if he asked that he could always come down on it. Maybe I'll have him start at $525 and come down if necessary. I'd like to buy the gun from him but it's not in my current budget so I'm just trying to figure out what it's worth for him. I'm sure if he can't find a buyer for it he'll make me a deal I can't refuse though.

Stu
stu925 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08597 seconds with 9 queries