The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old September 23, 2012, 07:12 AM   #1
raffi
Junior Member
 
Join Date: September 23, 2012
Posts: 2
Need Help identifying this revolver

Hi all,

First of all if this tread is posted in the wrong place please change it.

I had this revolver since I was child and I don't know where and when I owned this. I think its something collected by my dad. Lately I wanted to restore it. I know its a hard work but I'm into it. Someone told me that if you restore a gun it will loose its historic value in case it has some.

I did some research and I found a pic of a Montenegrin gun that resembles this one in many aspects also I noticed that the British Bulldog has very similar mechanism. (I attached a picture of the Montenegrin).

Mine has an Ottoman Empire stamp and some Arabic characters (Turks used to Arabic characters before they started using Latin). I couldn't read the characters except one thing that says "Year 27) and an M character on one side of the barrel and an R character the other side the serial number is 55352.

I'll appreciate if someone can identify this revolver also please let me know if its a good idea to restore it.

Thank you Guys





Attached Images
File Type: jpg masereel antoine gasser montenegrin-06.jpg (30.1 KB, 140 views)
File Type: jpg DSC_0121.jpg (45.8 KB, 144 views)
File Type: jpg DSC_0124.jpg (16.4 KB, 135 views)

Last edited by raffi; September 23, 2012 at 07:21 AM.
raffi is offline  
Old September 23, 2012, 11:10 AM   #2
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,769
Nagant revolver. Don't ask me if it's Belgian or Norwegian or some other make.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old September 23, 2012, 11:49 AM   #3
RJay
Senior Member
 
Join Date: November 2, 2005
Location: Arizona
Posts: 1,647
raffi, I hate to be the bearer of bad news but what you have is a " relic ", recognizable as a firearm, but way too far gone for restoration. By the time you remove all the corrosion there would be very little firearm left, along with the fact there are no known parts source. It is yous to do with as you wish, but IMO it would be best to soak it in a penetrant, let it drain and display it as it is.
__________________
Ron James
RJay is offline  
Old September 23, 2012, 04:50 PM   #4
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,694
Its not that bad. It has some light pitting but nothing detrimental to function. Not worth much and parts will be hard to find tho.
Hawg is offline  
Old September 23, 2012, 08:14 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,321
I think the photos found by raffi lack scale. Judging by the scale of the fingers, the relic revolver is not one of the so-called "Montenegrin revolvers"; those were huge guns in the .44 caliber range. Both the unknown and the Liege revolver shown appear to be of the small pocket revolver type with folding triggers. The ivory handled Liege revolver appears to be for the 5.6mm Velo-Dog cartridge and would be a small gun that could be covered by a hand.

Revolvers of that general type were made in Belgium (Liege) by the ton in the late 19th and early 29th centuries. They were also made in Germany, France, Spain, and by crude "factories" in the middle east and places like the Khyber pass area. In the latter areas, trademarks and other marks on European guns were crudely copied and often are unidentifiable as to origin.

Jim
__________________
Jim K
James K is offline  
Old September 24, 2012, 09:08 AM   #6
raffi
Junior Member
 
Join Date: September 23, 2012
Posts: 2
Thanks guys for the quick reply.

RJay, this is exactly what my dad told me that this gun is way too far gone for restoration. But I agree with Hawg Haggen that its not that bad. Thanks 4V50 Gary, and James K for the information. I think this gun was made in one of those crude "factories" in the middle east in time of Ottoman Empire.

James K, this is not a foldable trigger its a broken one

So, I'm sure now that this gun does not have any important historic or collectible value and I think I decided to restore it. I was a goldsmith and I'll consider this a fun project to spend some time in.

I already created the main spring for the hammer and tested to sandpaper the back of the grip and discovered that the pittings are not that deep. I think there are other 3 springs to be made today I'll create wooden grip covers to test the hammer spring.





Attached Images
File Type: jpg DSC_0140.jpg (23.1 KB, 88 views)
File Type: jpg DSC_0141.jpg (14.4 KB, 86 views)
File Type: jpg DSC_0142.jpg (19.4 KB, 90 views)
raffi is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07384 seconds with 10 queries