The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old September 23, 2012, 02:43 AM   #1
ronz
Senior Member
 
Join Date: January 12, 2012
Location: milwaukee wi
Posts: 220
Vintage reloading equipment I’m curious if any of this worth anything as collector it

Wanted a few things but had to buy the whole lot
It all still works fine most of it is from the 50’s could take more pictures if that would help Wasn’t sure where the best place was to put this mods please move if you think it would be better in the reloading form

The powder drop is an rcbs & has a metal top


Fill up your tank and get a box of 308’s for 39 cents how things have changed
ronz is offline  
Old September 23, 2012, 02:56 AM   #2
dab102999
Member
 
Join Date: April 12, 2012
Posts: 82
I would say those boxwood are worth at least. 39 cents nice find.
dab102999 is offline  
Old September 23, 2012, 03:24 AM   #3
saltydog452
Senior Member
 
Join Date: August 16, 2004
Posts: 478
I think you have a CH press and some models used propriatary shell holders. Don't know if the dies were propriatary for that press thread pitch or not. It looks as though you have both RCBS and CH shell holders displayed in the photo.

If it suits your specific caliber reloading needs and you have room for it, use it. The press looks hellforstout.

Just guessing, lots of water under that bridge. Try it.

salty
saltydog452 is online now  
Old September 23, 2012, 05:39 AM   #4
ronz
Senior Member
 
Join Date: January 12, 2012
Location: milwaukee wi
Posts: 220
That press is sure beefy doubt if it would be possible to wear it out
I didn’t need another single stage but that thing is so stout I might sell my rcbs and keep this one instead
It takes regular dies and has an adapter on it to use the regular shell holders
I was wondering what the other shell holders went to thought he might have had more stuff he forgot about but they are all for the press
I bought it for the dies steel 38/357 and a set of 308 to neck size only brass and the trimmer but after cutting ¼ off of two.556 that I made into 7.62x25’s was enough need to get a lee guide or something else that I can use with a drill
Could have bought just what I needed cheaper but got all of it for $125 seemed like a pretty good deal
Hopefully I can sell some of this so that I didn’t get it all just for a couple of sets of dies
ronz is offline  
Old September 23, 2012, 06:03 AM   #5
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,144
I have a CH press also but mine is a 3 stage, takes standard dies and shell holders. But CH doesn't have a primer feed for mine. I believe you got a decent deal, I have seen the 3 stage CH press go as high as $170.00 for just the press alone on ebay.

Last edited by rebs; September 23, 2012 at 06:14 AM.
rebs is offline  
Old September 23, 2012, 08:04 AM   #6
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
50's vintage?
Just not current.
Use and enjoy.
Rifleman1776 is offline  
Old September 23, 2012, 08:51 AM   #7
saitek
Member
 
Join Date: October 30, 2011
Location: iowa
Posts: 82
old but shure

it will work forever jus keep the two verticle ram's ram's lubed ,my ole man is sti9ll using his ,he is 74 ans had it for the last 53 years that i have been alive . it weork's great for every thing but reforming brass to another caliber .it will flex to much ,he got a rockchucker to do that .
saitek is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07823 seconds with 7 queries