ruger sbh re assembly

Infidel08 · September 22, 2012, 10:36 PM

Hey guys I'm looking for some help. I have a NM sbh in 44 mag. While cleaning it I removed the grip frame and cant get it to line back up with the screw holes in the rest of the gun. And a spring loaded plunger is givin me probblems. Any advice is appriecated.

drail · September 23, 2012, 12:33 AM

Get the Ruger manual.

PetahW · September 23, 2012, 01:17 PM

You DID cock it and slip a small pin through the hole in the tail of the mainspring strut, to take the spring pressure off, BEFORE you removed the gripframe screws, right ? .

.

**James K** · September 23, 2012, 11:34 PM

The spring loaded plunger sounds like the hand spring. You should just be able to compress it by pushing on the grip frame.

Jim

September 22, 2012, 10:36 PM	#1
Infidel08 Junior Member Join Date: August 11, 2012 Posts: 6	ruger sbh re assembly Hey guys I'm looking for some help. I have a NM sbh in 44 mag. While cleaning it I removed the grip frame and cant get it to line back up with the screw holes in the rest of the gun. And a spring loaded plunger is givin me probblems. Any advice is appriecated.

September 23, 2012, 11:34 PM	#4
James K Staff Join Date: March 17, 1999 Posts: 16,408	The spring loaded plunger sounds like the hand spring. You should just be able to compress it by pushing on the grip frame. Jim __________________ Jim K

September 23, 2012, 12:33 AM	#2
drail Junior member Join Date: February 2, 2008 Posts: 3,150	Get the Ruger manual.

September 23, 2012, 01:17 PM	#3
PetahW Senior Member Join Date: September 19, 2008 Posts: 3,273	You DID cock it and slip a small pin through the hole in the tail of the mainspring strut, to take the spring pressure off, BEFORE you removed the gripframe screws, right ? . .