The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old September 29, 2012, 07:07 AM   #1
'88Scrat
Senior Member
 
Join Date: July 11, 2011
Location: Kansas
Posts: 233
Zeroing an Eotech 512

Title pretty well sums it up really. I took my M1A out to the range to zero in my new Eotech. I started at 25 yards and was punching such a tight pattern that I had to get up close to see multiple impact points. It was very small, 1/2" MOA or even a little less.

25 yards seemed a little close for a .308 so I moved out to 100. But I found that the reticule almost totally obscured the target at that range. I moved all the way in to 50 yards even then then the reticule was slightly bigger then the 1" bullseye of my target.

Where do you guys sight in your Eotechs?
__________________
BOOM
'88Scrat is offline  
Old September 29, 2012, 12:11 PM   #2
Carne Frio
Senior Member
 
Join Date: August 28, 2008
Location: Near Fairbanks Alaska
Posts: 710
First off, it is a combat sight not a target sight.
I use a 50 yard zero for my 5.56 and .308.
This link should help out with the sight in.
http://www.eotech-inc.com/documents/...ire_Target.pdf
Carne Frio is offline  
Old October 1, 2012, 11:58 AM   #3
insomni
Senior Member
 
Join Date: September 28, 2011
Posts: 335
I sighted it at 25m. not sure about .308, but it'll put 5.56 right on target at 300m
insomni is offline  
Old October 1, 2012, 12:32 PM   #4
insomni
Senior Member
 
Join Date: September 28, 2011
Posts: 335
Actually... The more I think about it... Your 512 i'll assume has the standard ring/dot reticle. Your ring is 65mils, your dot in the center is 1mil. Which translates to 1" at 100m. So the dot SHOULD cover the 1" bullseye at 100m.
insomni is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07696 seconds with 9 queries