The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old September 15, 2012, 01:15 PM   #1
4runnerman
Senior Member
 
Join Date: January 16, 2010
Location: Minnsota
Posts: 2,774
MV

Hey all. Does some one have that program that can give me a close MV guess.
My chrono is not working due to a 308 bullet hitting it.

6MMBR
Lupua Brass
29.0 Varget
CCI-450 Primer
30 Inch Barrel
1 in 8 Twist

Thanks
__________________
NRA Certified RSO
NwCP- Performance Isn't Optional
4runnerman is offline  
Old September 15, 2012, 02:44 PM   #2
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,493
You forgot to include the bullet weight.
Mal H is offline  
Old September 15, 2012, 03:28 PM   #3
4runnerman
Senior Member
 
Join Date: January 16, 2010
Location: Minnsota
Posts: 2,774
Opps Sprry Mal

105gn Hornady's and 105 Burger VLD's

Thanks.
__________________
NRA Certified RSO
NwCP- Performance Isn't Optional
4runnerman is offline  
Old September 18, 2012, 10:51 AM   #4
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,493
Bumping this.

Doesn't anyone out there have QuickLoad who can help him out? (Unfortunately, I don't.)
Mal H is offline  
Old September 18, 2012, 11:45 AM   #5
SL1
Senior Member
 
Join Date: November 8, 2007
Posts: 1,997
QuickLOAD

Assuming that the 105 grain Hornady bullet is an A-Max, and using default values for parameters not specified (e.g., COL and case capacity), QuickLOAD gives 2887 fps and 59,550 psi.

QuickLOAD does not have formuals to use different primers, freebore or twist.

SL1
SL1 is offline  
Old September 18, 2012, 12:08 PM   #6
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Case h2o capacity in grains, from a fired case, is needed to even come close to an accurate prediction.

sudo passwd root
mrawesome22 is offline  
Old September 19, 2012, 05:50 AM   #7
4runnerman
Senior Member
 
Join Date: January 16, 2010
Location: Minnsota
Posts: 2,774
Thank You SL1. That's all i was looking for. From there i can fine tune. All i wanted was ball park for the scope adjustment. Im zeroed at 300 yards right now and wanted a ball park for when i get to 600 and 1000 yards. 2845 is where i was at with my other load before i switched to varget. So roughly 33 to 36 clicks to be back on at 600 again

Thanks to all
__________________
NRA Certified RSO
NwCP- Performance Isn't Optional
4runnerman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07944 seconds with 7 queries