The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting > Bullet Casting

Reply
 
Thread Tools
Old September 12, 2012, 05:40 PM   #1
David Bachelder
Senior Member
 
Join Date: August 23, 2011
Location: Trinity, Texas
Posts: 623
Pure clean plumbers lead

Stopped into a plumbing supply house in Huntsville, Coburns. They sell 5 lb lead ignots for $4.25 each. Thats .85 cents a pound. Pretty cheep huh and no shipping.

This is pure lead. You would still need tin and antimony, depending on what you're casting.
__________________
David Bachelder
Trinity, Texas
I load, 9mm Luger, 38 and 40 S&W, 38 Special, 357Magnum, 45ACP, 45 Colt, 223, 300 AAC, 243 and 30-06
David Bachelder is offline  
Old September 12, 2012, 06:40 PM   #2
Beagle333
Senior Member
 
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 1,353
That is pretty cheap. I thought $1.09 shipped was good. At least, that's what I'm payin'.
Beagle333 is offline  
Old September 12, 2012, 06:49 PM   #3
Edward429451
Junior member
 
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
A handful of shot and a few inches of solder and you're set to make some good boolits.
Edward429451 is offline  
Old September 12, 2012, 06:59 PM   #4
zxcvbob
Senior Member
 
Join Date: December 20, 2007
Location: S.E. Minnesota
Posts: 4,149
If you're a blackpowder shooter, you just hit the metaphorical gold mine. Pure lead is a lot harder to find than alloys.
__________________
"The only way to stop a bad guy with a gun is with a good guy with a gun"
zxcvbob is offline  
Old September 12, 2012, 10:42 PM   #5
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: 1B ID
Posts: 6,711
Cornbush is a plumber, and has gotten some for me in the past.

It's good stuff.

For a while, the local supply house was selling the 25 lb "chains" of 5 lb ingots at $0.60 / lb, certified. Like a bunch of idiots, we procrastinated and missed our chance. Now, the lowest price within 60 miles is $2.50 / lb for the same ingots/chains!
__________________
"Such is the strange way that man works -- first he virtually destroys a species and then does everything in his power to restore it."
FrankenMauser is offline  
Old September 13, 2012, 07:26 AM   #6
Mike / Tx
Senior Member
 
Join Date: April 8, 2000
Posts: 1,260
Thanks for the heads up. I NEED some and have a coworker who lives right in that area. I might have to sweet talk him into picking me up a few bars.
__________________
LAter,
Mike / TX
Mike / Tx is offline  
Old September 15, 2012, 10:33 AM   #7
Beagle333
Senior Member
 
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 1,353
Well, I didn't find any pure that was new and perfectly clean.... but I did stop at the scrapyard this morning and he has about a train car full of pipes, flanges, drains and roof flashing all piled up out back by the fence and he'll retail any of it for .65/lb
I guess I'm gonna start smelting! 'Gotta learn sometime I suppose.
Beagle333 is offline  
Old September 16, 2012, 05:51 AM   #8
GP100man
Senior Member
 
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,914
Hey Beagle333 watch the pipe joints ,some have hi tin content ,some ole timer plumbers realized the wiping lead melted at lower temps & "froze" faster
thus making it easier to work joints.

So ifin I was on a pile of pipes I`d pry the joints loose if I could first .
__________________
GP100man
GP100man is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07844 seconds with 7 queries