The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old August 31, 2012, 04:38 PM   #1
PlentyOPlinking
Junior Member
 
Join Date: August 31, 2012
Location: Midlands of SC
Posts: 5
Remington 1903-A3 From Cabela's

I very recently have purchased a 1903-A3 Springfield (Remington) from Cabela's. I found it on the used gun racks at the Rogers MN store. This is my first post with TFL. I have read through the Illustrated Guide to the '03 by Bruce Canfield but am looking for some additional insight into my particular rifle. The serial number and barrel date are within one month of each other; barrel 1/43 and receiver 2/43. The barrel bore is pristine. The stock does have the "OG" arsenal stamp but every other indication is that the rifle was not rebuilt as evidenced by the blued and not reparkerized furniture. Canfield does comment that the "OG" stamp is seen on many factory original rifles. Enough of my biased opinion; please look at the photos and let me know if I am on the right track or just wishful thinking.
Attached Images
File Type: jpg 298 20%.JPG (80.4 KB, 113 views)
File Type: jpg 295 20%.JPG (94.6 KB, 92 views)
File Type: jpg barrel 20%.JPG (48.1 KB, 95 views)
PlentyOPlinking is offline  
Old September 1, 2012, 07:59 AM   #2
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,869
Look at the fore-end cartouches just in front of the trigger guard. Is it the correct wood? If everything is marked Remington you may have a original condition rifle. It is possible to have a rearsenal mark on a untouched rifle.

Nice looking A3.
madcratebuilder is offline  
Old September 1, 2012, 01:53 PM   #3
PlentyOPlinking
Junior Member
 
Join Date: August 31, 2012
Location: Midlands of SC
Posts: 5
The stamps fore the trigger guard look like a square (or two), triangle and 2 circles; can't make out what is inside. See additional photos for the markings that I could find. Thanks for input.
Attached Images
File Type: jpg Fore Triggerguard TFL.JPG (90.2 KB, 43 views)
File Type: jpg Side Markings TGL.JPG (63.2 KB, 42 views)
File Type: jpg firing proof TFL.JPG (72.7 KB, 35 views)
PlentyOPlinking is offline  
Old September 1, 2012, 09:11 PM   #4
TX Hunter
Senior Member
 
Join Date: February 11, 2010
Location: East Texas USA
Posts: 1,776
Plenty O Plinjkin

Beautifull Rifle, I bought my 1903A3 from Cabelas also, but mine was in Buda Texas, I love the Gun Library its a Special Place.
It would be nice if you could include at least one full picture, not just the markings a nice picture of the Rifle.
TX Hunter is offline  
Old September 1, 2012, 10:06 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,516
Many of those '03A3's were never issued; they went from factory right to depot storage because there were enough M1 rifles to go around. Many were later sold through DCM or given to allied nations under the military assistance program (MAP). But Army regulations required that rifles being sold had to be proved and inspected, so most have a second inspection cartouche and usually (not always) a second proof mark.

Jim
__________________
Jim K
James K is offline  
Old September 2, 2012, 06:35 AM   #6
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,869
^^^^^^^

What Jim said. The OP's stock is Remington with two proof marks. Appears to be sanded, not unusual at all. The trigger guard may be a S-C, need a better photo.
madcratebuilder is offline  
Old September 2, 2012, 09:34 AM   #7
PlentyOPlinking
Junior Member
 
Join Date: August 31, 2012
Location: Midlands of SC
Posts: 5
Thank you madcratebuilder, James K, and TX Hunter for your help; it is exactly what I am looking for. Here are some additional photos. The closeup of the trigger guard ... it is a Smith Corona. I guess I am not too disappointed that I don't have a factory original, it will make it easier to take it to the range and enjoy it without thinking that I am putting too many miles on a "new" car.
Attached Images
File Type: jpg Left Side A3 TFL.JPG (69.5 KB, 38 views)
File Type: jpg Right Side A3 TFL.JPG (72.0 KB, 36 views)
File Type: jpg My A3 SC Trigger Guard TFL.JPG (98.7 KB, 33 views)
PlentyOPlinking is offline  
Old September 3, 2012, 04:23 PM   #8
robmkivseries70
Senior Member
 
Join Date: November 15, 2005
Location: free territory
Posts: 180
Just wiping the drool off of my key board.
robmkivseries70 is offline  
Old September 3, 2012, 07:08 PM   #9
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,516
The stock finish is not original. Those stocks were oil treated and are quite dull looking; that stock appears to have been varnished or treated with some kind of shellac or polyurethane.

Jim
__________________
Jim K
James K is offline  
Old September 3, 2012, 07:28 PM   #10
PlentyOPlinking
Junior Member
 
Join Date: August 31, 2012
Location: Midlands of SC
Posts: 5
Thanks to all for the comments. When I purchased the A3, the wood was very dry so I hit it with a little bees wax and lemon oil paste. As that is absorbed and evaporates, the shine tones down and is not as bright. Next time it needs feeding I'll just use the linseed oil.
PlentyOPlinking is offline  
Old September 4, 2012, 11:03 AM   #11
Freightman
Senior Member
 
Join Date: August 6, 2002
Location: NW Texas
Posts: 167
I dare you take pictures of my rifle just kidding. Mine is a '44 with a '43 barrel I wrote Remington and they said that it was correct that the barrels were one to two moth apart. Is yours a two grove barrel? mine is and really yours and mine could be twins even the SN has the same first numbers. Mine shoots cast 200gr bullets all in the X and 10 ring at 100 yds. You have a beautiful rifle and they shoot great. If you do shoot cast be sure to fit the bullet to the bore and I keep mine between 1800 and 1950fps. Great shooters and collectors, lts of history.
__________________
Freightman
Freightman is offline  
Old September 4, 2012, 04:38 PM   #12
Chris_B
Senior Member
 
Join Date: February 9, 2007
Posts: 2,841
Nice looking rifle
Chris_B is offline  
Reply

Tags
1903-a3 springfield , remington 1903-a3

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10688 seconds with 10 queries