The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 19, 2012, 10:58 PM   #1
Misssissippi Dave
Senior Member
 
Join Date: December 5, 2009
Posts: 1,405
A productive week

This week was pretty productive for reloading, at least for me. I was able to get some done and even put some on the shelf for later.

.357 Mag. 100
.38 Special 500
.45 acp 550
9 mm 600

I got them done in 4 evenings. I was not using a single stage for this. I still have a few hundred .45 cases needing a refill, not to mention a few thousand 9 mm cases.

How about you? Did anyone else get lucky and have a productive week?

Last edited by Misssissippi Dave; August 20, 2012 at 07:26 AM.
Misssissippi Dave is offline  
Old August 20, 2012, 07:55 PM   #2
CrustyFN
Senior Member
 
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
Sounds like a great week. That's what I need to do.
__________________
I don't ever remember being absent minded.
CrustyFN is offline  
Old August 20, 2012, 08:35 PM   #3
jwrowland77
Senior Member
 
Join Date: March 23, 2012
Location: Conway, Arkansas
Posts: 927
Not quite like that, but I did get some much needed work done. Tumbled 3000 9mm cases. Sorted through all 3000 into their respective headstamps. Then I trimmed, primed and filled about 600 for next months Steel Challenge and IDPA comps.
jwrowland77 is offline  
Old August 22, 2012, 01:19 PM   #4
Uncle Buck
Senior Member
 
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,558
I took a break from the actual reloading process, but did manage to get all my 700 .45 ACP and about 200 .357 Mag cases cleaned.


I have about 45 cases of .270 ready to be reloaded, just sitting on the bench with the primers, powder and bullets.

Went to Sierra Bullets Monday and picked up 20 pounds of 185 JHP bullets. (They had the 230 grain bullets last week, but as usual, I missed them!)

Replaced the media in my tumbler, first time in 3 years.

Now, according to Auntie Buck, I need to clean my room.
__________________
Inside Every Bright Idea Is The 50% Probability Of A Disaster Waiting To Happen.
Uncle Buck is offline  
Old August 22, 2012, 02:19 PM   #5
NWPilgrim
Senior Member
 
Join Date: September 29, 2008
Location: Oregon
Posts: 2,141
Went shooting at the gravel pit and picked up a mother lode of first firing LC 5.56 brass (400 cases) and 200 9mm cases. Got the brass cleaned, sized, swaged and trimmed. Plus, emptied a couple hundred of my own .223 cases and got rid of several more Berdan primed .30-06 rounds. Really liking my 75 gr Hornady BTHP .223 handloads!
NWPilgrim is offline  
Old August 22, 2012, 02:20 PM   #6
Woody55
Senior Member
 
Join Date: June 19, 2012
Location: East Texas
Posts: 407
If I can work outside, I need to work outside. There's always more to do than I can keep up with.

Reloading is for when it's raining. Or after dark if I'm not too tired or if I'm not spending time with my wife.

So over the last two weeks, I managed to reload 380 .40 S&W rounds. I need more primers and bullets. I'll probably switch over to .223 REM for a while.
Woody55 is offline  
Old August 22, 2012, 02:28 PM   #7
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,195
Even my worst weeks ...are great man ...!!

Let's see....this week, I loaded:

12ga 1oz of 8's 500 shells ( 20 boxes ) - a months worth
.410 shothells 1/2 oz of 9's ... 250 shells ( 10 boxes ) - a months worth

.357 mag ( 158 gr ) ... 1,000 rds ...20 boxes...about 2 months worth

setting up the press tonite to run some 9mm ( I'm down to about 16 boxes ...) ...and I will shoot 8 boxes this week. So I need to lay in some inventory. I'll crank out about 40 boxes or 2,000 rds in 3 or 4 hrs pretty easily.
BigJimP is offline  
Old August 22, 2012, 04:28 PM   #8
Misssissippi Dave
Senior Member
 
Join Date: December 5, 2009
Posts: 1,405
I don't come close to doing 400 rounds an hour even with 9 mm. The press is designed to do it. I know I'm not all that fast, but just getting the time to relax and reload is time well spent to me. At least I'm down to only needing to clean a few hundred more cases to be able to say all my brass is finally cleaned.

I wish I could spend several hours a week just reloading. It is a bit hard paying for all the components, if I could load as much as I would like to. It does feel good to just grab what you think you might like to shoot off the shelf for each range trip. When I do that I'm not thinking about the cost, just the fun. Cost only seems to come into play when I am placing yet another order to keep the components replenished. I hope another good reloading week comes again soon. So far this week I haven't loaded a thing.
Misssissippi Dave is offline  
Old August 22, 2012, 04:49 PM   #9
ltc444
Senior Member
 
Join Date: March 3, 2011
Location: Vernon AZ
Posts: 1,195
Reloaded 100 44 mag and 10 rounds 308. Developing first load so I have to wait until it stops raining before I can load some more.
ltc444 is offline  
Old August 22, 2012, 10:01 PM   #10
Arkie45
Member
 
Join Date: August 19, 2012
Posts: 18
Not a bad week, but I only had enough supplies left for just shy of a couple of hours reload therapy.

Arkie45 is offline  
Old August 26, 2012, 12:29 AM   #11
odsixer
Senior Member
 
Join Date: May 17, 2007
Location: great white north
Posts: 316
I gotta get off my a## and load some 308. Arkie that looks like a nice bench can I ask where you picked it up?
odsixer is offline  
Old August 27, 2012, 11:50 AM   #12
Arkie45
Member
 
Join Date: August 19, 2012
Posts: 18
Quote:
Originally Posted by odsixer View Post
I gotta get off my a## and load some 308. Arkie that looks like a nice bench can I ask where you picked it up?
Certainly! Got it at Sams Club. Very heavy duty, with 2" butcher block top. Went ahead and got the matching tool box with 1" butcher block top that slides underneath.
Arkie45 is offline  
Old August 28, 2012, 01:00 AM   #13
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 2,776
I was not as productive as the others, but I did this 100 times.

I had to made a die, with a 20 degree shoulder and a .299" neck.
Attached Images
File Type: jpg 308 into 308 turned neck into 260.jpg (155.4 KB, 7 views)
__________________
The word 'forum" does not mean "not criticizing books."
"Ad hominem fallacy" is not the same as point by point criticism of books. If you bought the book, and believe it all, it may FEEL like an ad hominem attack, but you might strive to accept other points of view may exist.
Are we a nation of competing ideas, or a nation of forced conformity of thought?
Clark is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09666 seconds with 8 queries