The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 10, 2012, 04:39 PM   #1
Adamantium
Senior Member
 
Join Date: June 6, 1999
Location: El Paso, TX
Posts: 992
Hornady SST and A-max

My 6.5x55mm (stock Howa 1500) gets below average results with 140gr SST bullets, about 3 moa with two powder and primer combinations. Just for comparisons sake I shoot 1 moa with 140gr Interlocks with both powders. That's probably my accuracy ceiling as a shooter right now anyway.

Has anyone tried both SSTs and A-max bullets in the same caliber and weight and gotten significantly different results? I know my rifle is a 6.5mm but that is pretty limiting so if you have actual experience with both bullets but in a different caliber I'd like to hear it too.

Thanks
__________________
New gun, same ol' shot.
Adamantium is offline  
Old August 12, 2012, 11:22 PM   #2
NESHOOTER
Senior Member
 
Join Date: October 16, 2009
Posts: 509
I have shot both same cal and yes you will always get different results as they are not the same I do perfer 165 SST for my 308 A-MAXs nor Interbond will always be different.
NESHOOTER is offline  
Old August 13, 2012, 03:11 AM   #3
dunerjeff
Senior Member
 
Join Date: March 31, 2011
Location: central Wisconsin
Posts: 440
Compared the 2 bullets side by side. Notice how much in bearing surface difference there is and where the balance point is.Those things among others will always make the bullets react different when shot. I myself like the 150gr Interlocks.
__________________
sent via telegram
dunerjeff is offline  
Old August 15, 2012, 07:27 PM   #4
Pat T
Member
 
Join Date: January 29, 2009
Location: NW PA
Posts: 84
In my .340 Wby I'm using the SST 200 grain and worked up a load that would get me 1 1/4" groups at 3150 fps. The rifle really liked the 200 grain Nosler ballistic tips, I could get that group down to 3/4" no problem. I've tried the accubonds and never did get the rifle to group well with those no matter what powder or charge I tried. Not saying they are junk, they just didn't like my rifle.

My rifle will shoot the Weatherby/Norma loaded ammo with the Hornady spire point 200 grains into about an inch, so I have a decent baseline to compare the SST to.

I'd like to try some Sciroccos some time but haven't been willing to pony up the dough for them.
Pat T is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07019 seconds with 9 queries