The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old December 8, 2012, 09:07 PM   #1
Bluehavana
Junior Member
 
Join Date: December 8, 2012
Posts: 4
Does anyone know this Proof Mark

This is an older 30-06 I can provide more pictures if necessary. The proof mark is on top of the barrel right where it goes into the action.
Attached Images
File Type: jpg IMG_1890.2.jpg (116.1 KB, 96 views)

Last edited by Bluehavana; December 8, 2012 at 09:52 PM.
Bluehavana is offline  
Old December 9, 2012, 06:47 AM   #2
Kreyzhorse
Senior Member
 
Join Date: April 12, 2006
Location: NKY
Posts: 11,518
Better pictures of the proof mark and the rifle might help in discovering information on your gun.
__________________
"He who laughs last, laughs dead." Homer Simpson
Kreyzhorse is offline  
Old December 9, 2012, 02:54 PM   #3
Bluehavana
Junior Member
 
Join Date: December 8, 2012
Posts: 4
more pictures

Here are some more photos. I really appreciate any and all input. I think it was made sometime in the 50s had a Pachmayr swing out scope mount on it. That says mauser 98 on it. It is very close in design to a Mauser.
Attached Images
File Type: jpg DSC_0001.2.jpg (79.7 KB, 61 views)
File Type: jpg DSC_0005.2.jpg (94.6 KB, 56 views)
File Type: jpg DSC_0010.2.jpg (132.0 KB, 55 views)
Bluehavana is offline  
Old December 9, 2012, 03:01 PM   #4
Bluehavana
Junior Member
 
Join Date: December 8, 2012
Posts: 4
Pictures

If any information or additional pictures i could provide would help please let me know, Thank you
Attached Images
File Type: jpg DSC_0011.1.jpg (100.8 KB, 44 views)
File Type: jpg DSC_0002.2.jpg (211.0 KB, 42 views)
File Type: jpg DSC_0013.1.jpg (101.9 KB, 38 views)
Bluehavana is offline  
Old December 9, 2012, 03:18 PM   #5
BillM
Senior Member
 
Join Date: January 20, 2009
Location: Amity Oregon
Posts: 374
It IS a mauser action. I don't think that mark is a proofmark. I
suspect it is the mark of the person/company that built the rifle,
or possibly the logo of the manufacturer of the barrel.

It looks like a well done 30-06 sporter built on a 98 mauser action.
Could date anywhere from the early 50's on---gunsmiths are still
building them today, although other actions are more popular now.
BillM is online now  
Old December 9, 2012, 03:27 PM   #6
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,791
Moved to research forum
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old December 9, 2012, 07:04 PM   #7
tahunua001
Senior Member
 
Join Date: July 21, 2011
Location: Idaho
Posts: 6,541
I agree, it was a mauser action, more than likely chambered in 8mm originally and was sporterized and converted to 30-06 later on which would have included the rebarrel where that is more than likely a private makers mark or local gunsmith trademark.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar.
I never said half the crap people said I did-Albert Einstein
You can't believe everything you read on the internet-Benjamin Franklin
Bean counters told me I couldn't fire a man for being in a wheelchair, did it anyway. Ramps are expensive.-Cave Johnson.
tahunua001 is offline  
Old December 9, 2012, 08:40 PM   #8
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,862
I've seen similar marks on WWII German dress bayonets.
Hawg is offline  
Old December 10, 2012, 04:30 PM   #9
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,533
From the looks of it, I suspect it was done by one of the companies that would strip rifles for the actions, rebarrel them, and sell them as economical hunting rifles. Santa Fe Arms, Golden State Arms, and many others did this, it was not uncommon. Value for these Mausers runs around $300-$350ish typically.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old December 10, 2012, 06:33 PM   #10
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,386
Take the action out of the stock, and check under the barrel; that's where German proof marks would be. So I agree, with the heavily varnished stock I'd say US scrub and rebarrel job.
__________________
F 135 - the right choice
mapsjanhere is offline  
Old December 10, 2012, 07:11 PM   #11
Bluehavana
Junior Member
 
Join Date: December 8, 2012
Posts: 4
Under Receiver

Thanks for all the input guys. These are the only makers i could fine under the receiver.
Attached Images
File Type: jpg DSC_0017.1.jpg (96.8 KB, 30 views)
Bluehavana is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09963 seconds with 10 queries