The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old August 1, 2012, 08:07 PM   #1
Armymutt
Member
 
Join Date: April 4, 2012
Location: Ft. Bragg, NC
Posts: 49
M1917 evaluation criteria

I'm looking at M1917s and was wondering if the two metal "posts" in front of the receiver should be flush with the wood, slightly above, or what.
Armymutt is offline  
Old August 1, 2012, 10:19 PM   #2
moose fat
Senior Member
 
Join Date: June 20, 2006
Location: Alaska, Yukon R. delta
Posts: 383



What posts?
moose fat is offline  
Old August 2, 2012, 12:08 AM   #3
kilimanjaro
Senior Member
 
Join Date: November 23, 2009
Posts: 1,976
If you mean the retainers for the rear of the handguard, they should be flush or slightly countersunk.
kilimanjaro is offline  
Old August 2, 2012, 09:16 AM   #4
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,871
Normally below the wood.

madcratebuilder is offline  
Old August 3, 2012, 05:04 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,835
There are no "metal posts" that I know of. I think Armymutt might be looking at the handguard rivets which go through the wood and hold the metal handguard clip in place. The round heads are about level with the wood, but the depth can vary depending on the rivets and whether the wood is original size or has been sanded or shrunken.

The handguard ring won't be "two posts" unless it has been cut off at the top.

Jim
__________________
Jim K
James K is offline  
Old August 4, 2012, 01:01 PM   #6
Armymutt
Member
 
Join Date: April 4, 2012
Location: Ft. Bragg, NC
Posts: 49
Yup, retainers would be the word. Thanks.
Armymutt is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06857 seconds with 7 queries