The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old July 12, 2012, 06:32 AM   #1
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,140
cleaned my 45 acp seat, crimp die

The seating plug on my rcbs 45 acp die was full of bullet lube so the seating plug would not screw all the way in. I decided to clean it out and took a wood dowel and pushed about 5 rings of lead stuck in it. I take it this was shaved lead from before I was told by Tim how to adjust it right.
Has anyone else found this in their die ?
I sure hope it was lead and not part of the die ?
rebs is offline  
Old July 12, 2012, 06:47 AM   #2
1stmar
Senior Member
 
Join Date: March 21, 2012
Location: Connecticut
Posts: 854
It was lead, you may want to bell the case mouth a tad more, you may be shaving lead off the sides of the bullet when seating.
1stmar is offline  
Old July 12, 2012, 05:30 PM   #3
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,033
I take my dies apart ....as part of my cleaning process ...whenever I change calibers on the press ...or at least every 3,000 rds or so.

Some dies are easier to take apart than others.....but Dillon dies as an example ...come apart with a snap spring clip / makes it real easy ----and I think others have the same design.

Even the decapping pin / resizing die in station 1 comes apart with a pair of wrenches...pretty easy to do...
BigJimP is online now  
Old July 13, 2012, 01:17 PM   #4
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 9,991
Lube keeps accumulating almost no matter what, because it is ironed off bullets as they enter the case. When I didn't want to change the adjustment, I've cleaned out seaters by using a long wood stick medical swab (like a long, single-ended Q-tip) wet with a little mineral spirits. That seems to dissolve the lube and the mineral spirits dry off.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Patron Member
Unclenick is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07481 seconds with 7 queries