The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old July 2, 2012, 06:54 PM   #1
billyj
Junior Member
 
Join Date: June 18, 2012
Posts: 3
original 1859 sharps rifle

Proud owner of an original 1859 sharps rifle . I am firing it using American Pioneer powder because of the difficulty of obtaining black powder.I am using 50 grains of powder to fire it, seem to work pretty good. 2 question am I hurting it by not using black powder ? Sharps has what is called an adjustable bouching,is this the same as a moveable sleeve which is found in most reproduction sharps and can it be clean the same way?
billyj is offline  
Old July 2, 2012, 10:24 PM   #2
Ideal Tool
Junior member
 
Join Date: October 6, 2010
Location: Michigan
Posts: 1,080
Hello, billyj..Now thats one I haven't heard of being fired in a long time! I do believe the original Sharps used a movable "bouching"..adjustable by a special tool threaded to cleaning rod..tapped down tight against breech-block. How effective is the gas sealing on yours? After all these years..I wonder if that thing will even budge? I have a Shilo Farmingdale 1863 percussion rifle in .45 which I purchased back in 77'..this uses the later Conant gas-seal plate..I have not noticed any leakage around breech when firing. Never used the American Pioneer..but I would caution to clean very well, with a water-based solvent..I have heard some of the subs are corrosive. Best of luck!
Ideal Tool is offline  
Old July 3, 2012, 05:39 PM   #3
billyj
Junior Member
 
Join Date: June 18, 2012
Posts: 3
Thanks Idael Tool, gas seal seem to be tight , gun shoots fine.Iwas just trying to keep it that way.Dixie Gun Works has a sharps sleeve remover tool may give that a shot. would hate not to be able fire it.
billyj is offline  
Old July 3, 2012, 06:23 PM   #4
Slamfire
Senior Member
 
Join Date: May 27, 2007
Posts: 4,133
These would be the people to ask:


American Pioneer Powder, Inc.
20423 State Road 7 #F6-268, Boca Raton, Florida 33498
Toll Free 888.756.7693


I just looked at their web page, looked at their FAQ, no special warnings about applications.
__________________
If I'm not shooting, I'm reloading.
Slamfire is offline  
Old July 4, 2012, 03:36 PM   #5
arcticap
Senior Member
 
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 2,973
APP doesn't have any sulfur and won't cause any corrosion unless the residue is left in place which then absorbs moisture. It's a moderate strength powder that gains velocity with more compression.
arcticap is offline  
Old July 6, 2012, 05:58 PM   #6
billyj
Junior Member
 
Join Date: June 18, 2012
Posts: 3
Thanks for the help. Think I will stay with American Pioneer powder, and with any luck the sharps will be around and firing in an other fifty years.
billyj is offline  
Old July 6, 2012, 06:37 PM   #7
Amsdorf
Junior member
 
Join Date: July 24, 2011
Location: Saint Louis, Missouri
Posts: 849
I'm jealous!!!!

The Sharps Rifle is on my bucket list.
Amsdorf is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07626 seconds with 9 queries