The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old June 16, 2012, 06:47 AM   #1
Kickin' Mule
Junior Member
 
Join Date: June 12, 2012
Location: Augusta, Georgia
Posts: 5
Cannons Anyone???

I am a new member hear, maybe a week now, and I have been "checkin'" out the site. I don't know a "lot of the jargon talk" ya'll speak, but am tryin' to "get it together". I must say that I'm a little surprised that there is no mention of "cannon shooting", I was almost sure that someone here, was into black powder cannons. I got into shooting a cannon back in 1980, when I took a cannon that I had bought in Hong Kong in 1966, when l was there in the Navy, and made it into a "shooter". I did have to "beef it up" a little, by inserting a "liner" made from iron pipe, and I welded a 1 1/2" pipe coupling on the "breech end", to keep it from exploding with a ball in it. I originally had a "cap" on the end, but through experimentation, I found that it wasn't "safe enough" yet for my comfort. So I went to a "plug" and that worked. I shot that for a year or so, and I got "itchy" to make something "bigger" and "badder'. I ended up with a 1" smooth bore. Within a year, I had it fitted with open sights, and at 50 yrds. I could hit a 5" target. [When I get proficient with this site, I can put some pictures of "The Captain", and you can judge for yourself ] Anyhow, that's how I got into Black Powder. It wasn't long before I had purchased a 50 cal Hawkin, 1860 Navy Colt, and an 1858 Remington. Now, after retireing, sold the home, moved into a trailer, and mostly travel, visit grandkids and such, I only have the Remmy with me, and got the "Captain" stored at my nephews. I go to MI once a year to shoot it, and bring back memories. Enough hog wash, just thought I'd ask about other "cannon shooters" in case there were some of ya out here.
See ya in the discussions, Kickin' Mule, back to grazin,,,,,,,,,,,,,,,,,,,,,,
Kickin' Mule is offline  
Old June 16, 2012, 06:55 AM   #2
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,307
I have no experience with cannons other than hand cannons.

You might send a private message to one of the moderators to ask them to move this to the Black Powder, and Cowboy Action Shooting forum. You would likely get more responses that way.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Old June 16, 2012, 08:17 AM   #3
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
Do some Googling. There are several good cannons only discussion forums.
Rifleman1776 is offline  
Old June 17, 2012, 07:19 AM   #4
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,868
Back in the early 70's a friend and I made a 1" bore cannon and used black powder, a combination of dry and wet paper towels as wadding. This would embed small bits of paper towel 1/8 inch into solid wood. We went through several lbs of powder the summer of 76.
madcratebuilder is offline  
Old June 17, 2012, 07:26 AM   #5
Skadoosh
Senior Member
 
Join Date: December 13, 2010
Location: Virginia
Posts: 1,773
Kind of tough to shoehorn a cannon into the gun safe. There aren't many here who can do it.
__________________
NRA Life Member (2003)
USN Retired
I think that one of the notions common to the anti-gunner is the idea that being a victim is 'noble'; as if it is better to be noble in your suffering than disruptive in your own defense.
Skadoosh is offline  
Old June 17, 2012, 10:24 AM   #6
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 5,473
Fun but Dangerous

There aren't many old Buckskinners that have not gotten into cannons, somewhere along the line. Guess I'm no exception as I still have about five and one golf-ball mortar. These are a whole bunch of fun. ....

During one of my range times, there was a fella who showed up with a fairly large mortar and for compression, he hammered an empty soda can over some paper wadding. I'm guessing he put about a third to a half a can of powder. Everyone on the line stopped to watch the show. That is until the third round when one of his windows on his truck, shattered. ....

Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is offline  
Old June 17, 2012, 02:42 PM   #7
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 7,018
I have quite a few smaller cannon. Haven't shot them in years, though.
__________________
Bill DeShivs
www.billdeshivs.com
Bill DeShivs is offline  
Old June 18, 2012, 11:47 AM   #8
indy1919
Senior Member
 
Join Date: February 15, 2011
Posts: 277
Hey KickingMule..

I love Cannons.. They are real fun.. But can be a problem..

-- The 1st thing I would do is start Small.. Get a small cannon to play with..

-- Then Build up to another larger cannon that you feel comfortable with it..

-- Always treat the cannon as a possible bomb..

-- Always under load it to its maximum powder load..

Purchase your cannons for someone who has been in building them for a while

One place that I have found to have a nice cannon selection is

http://www.blackpowder-cannons.com/

A lot of variety and can build custom work.. Plus I have trusted the guy with my own fingers and eyes.. But there are other great cannon builders So do not stop there..
indy1919 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10293 seconds with 9 queries