The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old June 6, 2012, 09:52 PM   #1
emptythemag
Junior Member
 
Join Date: May 28, 2012
Posts: 2
Conversion planned on CVA 1858 with old style finish

A while back I purchased a second hand, older CVA, steel frame model of the 1858. It's marked CVA on the frame itself and Connecticut Valley Arms Inc. on the top of the barrel. The bottom of the barrel is simply marked with "Black Powder Only-Made In Italy". There are no other stampings found anywhere on the pistol. It could possibly have been a defarb, but as an older piece (thinking late 1960's to 1970's), I suspect that's the way it was made.

The revolvers finish itself is what we all call an "antique" or "original finish". In this case, sort of a greyish color patina with no appearance of bluing.

Having read all sorts of stuff (both good and bad) about older CVA 1858's, it looks like parts from Uberti's will likely interchange with it.

I just bought a Krist Konversion .45 LC 5 shot cylinder with the loading gate and also a Richards Mason style spring loaded ejector (yes..I know this is not the traditional style ejector for the 1858, but I like them anyway). These parts are designed to fit an Uberti, but I wont know for sure, till they arrive.

Has anyone tackled a cartridge conversion on a CVA 1858? The conversion parts are blued but I would like to change the finish over to more closely match my 1858's old finish.

Any idea on how replicated "old factory finishes" are accomplished?

I suppose I can simply strip the Krist parts down with vinegar then do a little rust browning or similar finish but it still will be far different from the overall finish on my CVA. I'll have to see about a photo so you all can see the finish I'm taking about.
emptythemag is offline  
Old June 6, 2012, 10:32 PM   #2
Hawg Haggen
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,427
It should have a manufacturers logo on it somewhere, maybe on the bottom barrel flat next to the cylinder pin. It should also have a date code on it. If it's that old it will be ASM. If it's newer from the late 90's it's a Pietta.
Hawg Haggen is online now  
Old June 16, 2012, 08:34 AM   #3
zullo74
Junior member
 
Join Date: August 8, 2009
Posts: 374
Any followup on this project? I sure would like to see the finished gun.
zullo74 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05922 seconds with 9 queries