The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 4, 2012, 07:40 AM   #1
LeadHead
Member
 
Join Date: February 10, 2006
Posts: 17
LR 308 leade or throat length.

I have a DPMS Recon 308 1 in 10" twist 16" barrel. Rifle has about 300 rounds through it. Accuracy is not what it should be with factory ammo so I wanted make some reloads. DPMS says 1.5" @ 100 yards. I used my COL gauge and the measurement is 2.915. I did it 6 times. Bullet is a Matchking 168gr. This measurement seems to long to me. Is it possible the throat is cut to long or is this average for this kind or rifle? Is there a rule about how much bullet should be seated into the case? My plan was to load some 168, 175 and 180gr. Thanks, Rich
LeadHead is offline  
Old June 4, 2012, 12:39 PM   #2
243winxb
Senior Member
 
Join Date: July 26, 2011
Posts: 980
308 win. Throat/Leade

http://www.saami.org/PubResources/CC...Winchester.pdf from www.saami.org If you check the SAAMI drawing, it may give you an idea. Measuring from the cartridge head/base to ogive of the bullet is the measurement you need. For an auto loader, i would want the bullet to make full contact with the neck. Seating the bullets to long will reduce neck tension & may result in crooked bullet from hitting the feed ramp.
243winxb is offline  
Old June 4, 2012, 02:54 PM   #3
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,280
Depends on your chamber. Clymer says the freebore is 0.075" on their match reamers, 0.090" on their standard SAAMI reamer, and 0.150" on their 7.62×51 reamers. That makes a difference. Lots of guns shoot just fine with some bullet jump, though.

In your shoes, I would back down to a starting load and run through Berger's exercise for VLD's for hunters rather than target shooters (you're not going to jam the lands loading from a magazine anyway). Load singly and see if you don't find a better COL for your chamber?
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old June 5, 2012, 06:36 AM   #4
LeadHead
Member
 
Join Date: February 10, 2006
Posts: 17
Thank you both for the useful info.
LeadHead is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:46 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06373 seconds with 9 queries