The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 31, 2012, 12:56 PM   #1
browninghunter86
Senior Member
 
Join Date: November 14, 2011
Posts: 524
Need to Buy a Case Trimmer

Looking at these two case trimmer kits. Anyone have experience with either of these two? Looking for a trimmer to set trim length to a specified length on cases and will be used for 308 and AR 223 brass

http://www.midwayusa.com/product/614...se-trimmer-kit

http://www.midwayusa.com/product/315...la=ProductDesc

Only thing I can think of is the Forester does not have to have shellholders like the Hornady.....
browninghunter86 is offline  
Old May 31, 2012, 01:11 PM   #2
Fox1
Senior Member
 
Join Date: September 27, 2008
Posts: 297
I have the Hornady Cam Lock and use it for .308 and .270 and that's about it.
I love it!

For .222 and .223 I'm using the RCBS Trim Pro-2.

http://www.midwayusa.com/product/817...se-trimmer-kit
Fox1 is offline  
Old May 31, 2012, 02:52 PM   #3
603Country
Senior Member
 
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 2,248
I have the RCBS Trim Pro 2 and the 3 way cutterhead that trims, chamfers, and deburrs all at once. I really like combining all three bothersome and time consuming actions all in one.
603Country is offline  
Old May 31, 2012, 05:04 PM   #4
Nathan
Senior Member
 
Join Date: July 1, 2001
Posts: 1,906
Wilson Case Trimmer

This is my favorite. It is a super accurate trimmer which is datum'd correctly. That is it cuts perpendicular to the chamber walls.

Most others cut parallel to the case head which is not really guaranteed square to the chamber walls.
Nathan is offline  
Old May 31, 2012, 05:10 PM   #5
AllenJ
Senior Member
 
Join Date: December 11, 2009
Location: Northern California
Posts: 1,273
I have a Forester and I like it. Very simple design and easy to use.
AllenJ is offline  
Old May 31, 2012, 05:44 PM   #6
moxie
Senior Member
 
Join Date: October 17, 2006
Location: TX
Posts: 513
Possum Hollow. Simple and cheap.

https://www.possumhollowproducts.com..._TRIMMERS.html

Buy it here:

http://www.thecleaningandreloadingstore.com/
__________________
If you want to shoot...shoot...don't talk! Tuco

USAF Munitions 1969-1992
RVN 1972-1973
moxie is offline  
Old May 31, 2012, 06:10 PM   #7
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 2,902
I use the Hornady Cam Lock as well (and the LNL AP Press).
tobnpr is offline  
Old May 31, 2012, 06:18 PM   #8
browninghunter86
Senior Member
 
Join Date: November 14, 2011
Posts: 524
actually just saw this one. http://www.midwayusa.com/product/716...kit?cm_vc=S014

Does not use collets and would be about same price as the Forster

Any thoughts on this one?
browninghunter86 is offline  
Old June 1, 2012, 01:17 AM   #9
droptrd
Senior Member
 
Join Date: September 22, 2011
Location: Illinois
Posts: 310
I also have the Forster. I trim 223, 22-250 and 762x39 with it. Very consistent. Very easy to use. Much easier than the hand trimmer ive been using for ever.
droptrd is offline  
Old June 7, 2012, 09:45 AM   #10
budman46
Member
 
Join Date: July 21, 2007
Location: centraL pa. on the west bank of the susquehanna river
Posts: 22
lee's system works well...accurate with no adjustments necessary, ready for a power drill set-up, inexpensive. got two foresters but use the lee almost exclusively.
__________________
budman

ignorance is fixable...
budman46 is offline  
Old June 7, 2012, 12:11 PM   #11
Ole 5 hole group
Senior Member
 
Join Date: November 13, 2002
Location: South of Winnipeg
Posts: 189
If you want the very best and can afford it, go with the Wilson. Sinclair makes a few goodies for the Wilson if you feel the need for those, but that trimmer set the standard bar extremely high back in the day.

If you just want an excellent trimmer, then the Hornady, Forester and others will do what needs done.

http://www.sinclairintl.com/.aspx/pi...R-PLATFORM-KIT
Ole 5 hole group is offline  
Old June 7, 2012, 01:25 PM   #12
browninghunter86
Senior Member
 
Join Date: November 14, 2011
Posts: 524
went with the Wilson and love it. Trims brass all to same length and is well built
browninghunter86 is offline  
Old June 7, 2012, 11:20 PM   #13
GWS
Senior Member
 
Join Date: September 8, 2010
Location: New Mexico
Posts: 454
I've used my Forster for 40 years. It's a finely machined tool that was obviously built to last. Forster now makes a power adaptor for it and even better, now has a three-way cutter for the most popular calibers. I have one in .223, .243, and .30. Now trimming, chamfering, and deburring is a single step....with the power adaptor, a very fast single step.

Wilson's are also good tools. Just slower.

When you get tired of hand cranking like I finally did after 38 years, you may find a desire to do this: (Click the picture below)
GWS is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10007 seconds with 7 queries