The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 25, 2012, 07:54 PM   #1
Newton24b
Junior member
 
Join Date: February 10, 2009
Posts: 974
case lube

how does the use of air drying case lubricants that get sprayed inside the case mouth not cause/increase set back and bullet jump when used with jacketed bullets?
Newton24b is offline  
Old May 25, 2012, 09:49 PM   #2
Jimro
Senior Member
 
Join Date: October 18, 2006
Posts: 5,281
Neck Tension. Or neck tension and crimp. If I understand what you are asking correctly.

Jimro
__________________
"Gorsh" said Goofy as secondary explosions racked the beaten zone, "Did I do that?"

http://randomthoughtsandguns.blogspot.com/
Jimro is offline  
Old May 25, 2012, 10:55 PM   #3
DeadCenter
Senior Member
 
Join Date: September 17, 2006
Posts: 105
I use Hornady One Shot and place around 100 .223 in a 1 gal plastic bag, spray in a few shots, roll the brass around. Then I dump it out on my bench, let it dry a few minutes and resize. I typically run the brass through the tumbler again for 30 minutes or so after I resize. I've had no issues using this method.
DeadCenter is offline  
Old May 25, 2012, 11:19 PM   #4
mo84
Senior Member
 
Join Date: February 27, 2011
Location: Michigan
Posts: 257
I use the same place them in the bag technique but without tumbling (dont have one) and it seems to work very well. My bullets are crimped also so that probably helps.
mo84 is offline  
Old May 25, 2012, 11:28 PM   #5
dacaur
Senior Member
 
Join Date: March 16, 2010
Posts: 733
not sure why it doesnt affect it, but even with uncrimped .300 savage, never a problem with neck tension.... I crimp everything else....
dacaur is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07058 seconds with 9 queries