This would a long shot (threaded barrel)

MagnumWill · May 11, 2012, 07:10 PM

One thing I would like to find. Does anyone have any information on a manufacturer? I would *really* prefer not to take a virgin barrel, weld on more purchase, and thread accordingly (but it could be done).

I'm looking for.... (drum roll)

a 3" bushingless bull barrel for my Colt New Agent .45, that protrudes about 1/2" or so to accept a suppressor. Know of anyone?

TrailBlazinMan · May 11, 2012, 11:46 PM

Will it take a bull barrel from a Commander? If so just cut that down and thread it. Also, you never want to weld on a barrel, use silver solder instead.

MagnumWill · May 12, 2012, 02:06 AM

I haven't seen a 3.5 or 4-inch commander barrel, but part I the problem is that the barrel is ramped, until the very end where it centers in the slide; so I'm worried that the area that would mate up with the 3" slide would be halfway up that ramp. I was hoping that there was a company (maybe just Colt) that sells replacement barrels that I could look at, at least.

TrailBlazinMan · May 12, 2012, 11:59 AM

Here is a ramped bull Commander barrel. http://www.schuemann.com/store/detai...-cu45cnm4.aspx

Your friendly gunsmith can thread barrels and is probably the one to talk to about this job.

MagnumWill · May 12, 2012, 10:16 PM

Bingo!! That looks like the same ramp length as the 3". Seeing that it's cylindrical out to the 3.5" mark, it'll leave enough purchase on the barrel for the slide to seat properly if the first 7/16" of that barrel has threads. It will be very easy to buzz some threads onto that guy, this is gonna be good. Thanks!

BoogieMan · May 13, 2012, 08:42 PM

Quote:

Your friendly gunsmith can thread barrels and is probably the one to talk to about this job

FYI- any machine shop can thread the barrel. Its a very basic skill within the trade.

May 11, 2012, 07:10 PM	#1
MagnumWill Senior Member Join Date: March 19, 2009 Location: Central Colorado Posts: 657	This would a long shot (threaded barrel) One thing I would like to find. Does anyone have any information on a manufacturer? I would really prefer not to take a virgin barrel, weld on more purchase, and thread accordingly (but it could be done). I'm looking for.... (drum roll) a 3" bushingless bull barrel for my Colt New Agent .45, that protrudes about 1/2" or so to accept a suppressor. Know of anyone? __________________ Always carry an extra magazine when CCW. Friends don't let friends get a double-feed first round out. -Will

May 12, 2012, 02:06 AM	#3
MagnumWill Senior Member Join Date: March 19, 2009 Location: Central Colorado Posts: 657	I haven't seen a 3.5 or 4-inch commander barrel, but part I the problem is that the barrel is ramped, until the very end where it centers in the slide; so I'm worried that the area that would mate up with the 3" slide would be halfway up that ramp. I was hoping that there was a company (maybe just Colt) that sells replacement barrels that I could look at, at least. __________________ Always carry an extra magazine when CCW. Friends don't let friends get a double-feed first round out. -Will

May 12, 2012, 10:16 PM	#5
MagnumWill Senior Member Join Date: March 19, 2009 Location: Central Colorado Posts: 657	Bingo!! That looks like the same ramp length as the 3". Seeing that it's cylindrical out to the 3.5" mark, it'll leave enough purchase on the barrel for the slide to seat properly if the first 7/16" of that barrel has threads. It will be very easy to buzz some threads onto that guy, this is gonna be good. Thanks! __________________ Always carry an extra magazine when CCW. Friends don't let friends get a double-feed first round out. -Will

May 11, 2012, 11:46 PM	#2
TrailBlazinMan Member Join Date: April 30, 2012 Location: Springfield, GA Posts: 35	Will it take a bull barrel from a Commander? If so just cut that down and thread it. Also, you never want to weld on a barrel, use silver solder instead.

May 12, 2012, 11:59 AM	#4
TrailBlazinMan Member Join Date: April 30, 2012 Location: Springfield, GA Posts: 35	Here is a ramped bull Commander barrel. http://www.schuemann.com/store/detai...-cu45cnm4.aspx Your friendly gunsmith can thread barrels and is probably the one to talk to about this job.