The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old May 7, 2012, 03:49 PM   #1
Junior Member
Join Date: May 7, 2012
Posts: 2
XD9 Subcompact slide jam

Hello. Recently I purchased a Springfield XD9 for concealed carry. After cleaning it, however, I worked the slide to cycle bullets through to make sure it was feeding properly. However, I'm now at the point where there is a live round in the chamber, and the slide won't move back all the way. The back of the barrel moves down a little, and slide moves back almost a centimeter, however it won't go back farther. I also have indication that the gun is cocked. Ideas, or should i take it into a gunsmith?
deadhand31 is offline  
Old May 7, 2012, 03:50 PM   #2
Junior Member
Join Date: May 7, 2012
Posts: 2
I also want to point out that I have the sense not to try to fire it while it is in this condition. That is all for now.
deadhand31 is offline  
Old May 10, 2012, 11:41 AM   #3
Ralph Allen
Senior Member
Join Date: January 21, 2007
Posts: 398
Things that I have tried when in your situation with other guns. Using a table of some sort, put the front of the slide on the edge and push while pulling back on the rear with the other hand. If the gun is out of battery it probably won't fire, but still never pull the trigger. Is the tacke down lever back to it's horizontal position? Make sure the magazine is out of the pistol while trying any fix. The pushing using a solid table usually works.
Ralph Allen is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:41 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.13378 seconds with 7 queries