|
April 28, 2012, 04:28 PM
|
#1 |
|
Senior Member
Join Date: December 6, 2009
Location: Hudson Valley,NY
Posts: 189
|
Need a good smith
The loading lever retaining clip fell off of my Pietta 1860 again. Had my local smith tac weld it back on but I think welding is not his forte. Need a good smith with fairly rapid turn around time. Live in the Northeast but not essential.
|
|
|
April 28, 2012, 04:38 PM
|
#2 |
|
Senior Member
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 3,418
|
Howard....
PM sent.
__________________
Doc My reading of history convinces me that most bad government results from too much government. Thomas Jefferson |
|
|
|
April 28, 2012, 07:27 PM
|
#3 |
|
Senior Member
Join Date: March 20, 2008
Location: Missouri
Posts: 1,734
|
Take a center punch and put a couple dings in the bottom of the latch and on the barrel in the dovetail. Clean the dovetail and latch real good with degreaser,ut a couple drops of super glue in the dovetail then tap the latch back in. Wipe off the excess super glue. Red Locktite works also.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce |
|
|
|
April 28, 2012, 10:31 PM
|
#4 |
|
Senior Member
Join Date: May 27, 2006
Location: Ozarks
Posts: 1,769
|
I doesn't need t be welded, it needs to be silver soldered in place. It will then never move.
__________________
"A Liberal is someone who doesn't care what you do, as long as it's mandatory". - Charles Krauthammer |
|
|
 |
| Thread Tools | |
|
|
