The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old April 27, 2012, 06:15 PM   #1
dlbarr
Senior Member
 
Join Date: October 8, 2011
Posts: 160
Replacement front sight for 1851s (& others)

Mine groups real well but shoots pretty high, I have filed off about as much of the rear sight (hammer) as I feel I should. The top of the cylinder is just starting to show at the bottom of the 'V' and throws off my sight focus just a tad.

Does anybody make a replacement front sight for these? Also, does this same situation exist on other Colts: 1860s, Dragoons etc? Thanks
dlbarr is offline  
Old April 27, 2012, 06:59 PM   #2
Fingers McGee
Senior Member
 
Join Date: March 19, 2008
Location: Missouri
Posts: 1,860
Coincidentally, I just sent VTI Gunparts an email about replacement Uberti 1851 Navy sights. VTIs replacement Uberti 1851 front sight is .225 in tall including the part in the barrel. By my measurement, that is about .160 above the barrel. If yours is shorter, a VTI replacement may be what you need.

Or.......... you could make one out of a piece of 1/8 inch brazing rod chucked in a dremel and some jewelers files like I did yesterday afternoon.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters
Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce

Last edited by Fingers McGee; April 27, 2012 at 10:43 PM.
Fingers McGee is offline  
Old April 27, 2012, 08:02 PM   #3
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,752
Get a brazing rod and make it as tall as you want.
Hawg is offline  
Old April 27, 2012, 08:08 PM   #4
dlbarr
Senior Member
 
Join Date: October 8, 2011
Posts: 160
Quote:
Get a brazing rod and make it as tall as you want
dlbarr is offline  
Old April 27, 2012, 09:27 PM   #5
Hellgate
Senior Member
 
Join Date: November 18, 2010
Location: Orygun
Posts: 523
I've removed the front sight (lifted it out of the hole) and epoxied a cut off #4X3/4" brass flat head phillips wood screw (upside down). This fix made a nice tall bead/post that a little cold bluing "ages" nicely and it looks good if you don't goop too much epoxy onto the barrel. Cut, size, & shape the "bead" before you glue it on. The simplest fix I've found so far for Navies. See photo below. It makes a nice, taller sight with a broad base.
Attached Images
File Type: jpg NavyFrSight.jpg (222.3 KB, 48 views)
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball.
SASS#3302 (Life), SASS Regulator, NRA (Life), DGB#129
Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell)
Hellgate is offline  
Old April 27, 2012, 11:23 PM   #6
dlbarr
Senior Member
 
Join Date: October 8, 2011
Posts: 160
Hey that looks good HG. Great idea!
dlbarr is offline  
Old April 28, 2012, 04:47 AM   #7
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,919
Looks good Hellgate.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07076 seconds with 8 queries