The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old December 3, 2000, 12:33 PM   #1
Coolray
Senior Member
 
Join Date: August 10, 2000
Location: Spokane ,wa
Posts: 290
I'm getting to the point that I do not have enough boxes for my reloads. I looked at midway and they have boxes but I really don't want to spend that money if I don't have to.
Can I store the ammo in bulk in a Plastic ammo box for extended periods of time. I estimate each box will hold 5000+ rounds in 9MM .44 and .45 I have plenty of cool dry storage area in the house.
__________________
Hello My name is Coolray.............And I'm an Addict
Coolray is offline  
Old December 3, 2000, 12:38 PM   #2
johnwill
Senior Member
 
Join Date: April 6, 2000
Location: PA
Posts: 3,451
Absolutely, there is no reason that the ammo has to be individually boxed. As long as you store the ammo in an environment that you are comfortable living in, it will probably outlive you. I see bulk ammo sold all the time loose in an ammo box, and I've never heard that it had any effect on the ammo...
johnwill is offline  
Old December 3, 2000, 01:14 PM   #3
Contender
Senior Member
 
Join Date: December 10, 1998
Location: NY
Posts: 680
Dole out your ammo into some small freezer bags. Throw in a VPI chip if you want, and place them flat and smoothly into your plastic ammo box. I like to mark each bag with a count and date. That's what I've done for years now. Store in a cool dry place, NOT in the oven!
Contender is offline  
Old December 3, 2000, 04:40 PM   #4
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 35,729
I use GI ammo cans for my excess ammo.

I would recommend AGAINST the VPI chip, thought, for extended storage. I've seen some reports that say that the vapors from the VPI can cause primer problems after awhile.

True or not? Beats me.

I use silica gel packs in my ammo cans.
Mike Irwin is offline  
Old December 3, 2000, 05:10 PM   #5
LOCHFAL
Senior Member
 
Join Date: January 7, 2000
Posts: 211
I store all my reloads loose in 30 cal ammo cans, then I put four of the 30's into the big 20mm cans for easier stacking. Never had any problem with any of the ammo and some of it has been around in that condition for over twelve years.
__________________
Remember, Wherever you go, there you are.
LOCHFAL is offline  
Old December 3, 2000, 06:51 PM   #6
burrhead
Senior Member
 
Join Date: July 6, 1999
Location: Chihuahuan desert, Texas
Posts: 402
I store mine in 3# coffee cans. I can holds about 500 .45 acp.
__________________
Join the NRA and TSRA

The older I get the better I was.
burrhead is offline  
Old December 3, 2000, 11:00 PM   #7
tawakoni
Member
 
Join Date: November 22, 2000
Location: Dallas, Texas
Posts: 68
Ammo Storage

I must have over a hundred plastic 50rd ammo boxes in various colors and styles cause that's the way I stored my reloads. They're all empty and just taking up space. Now I store my ammo in .50 caliber GI cans. Each can holds 1250 .45ACPs. When I go to the range, I transfer them to .30 caliber cans. I ain't as young or strong as I used to be.
tawakoni is offline  
Old December 4, 2000, 12:32 AM   #8
Archie
Senior Member
 
Join Date: May 26, 2000
Location: Hastings, Nebrasksa - the Heartland!
Posts: 2,083
I have the 50 and 100 round ammo boxes, too. Now relegated to range trips. Also makes it easy to count ammo for range and match trips.
Ammo is stored in in plastic boxes and 30 caliber ammo cans. I found a bunch of matching plastic boxes with lids at the 99 cent store. I buy them ten or so at a time.
Archie is offline  
Old December 4, 2000, 01:37 AM   #9
Charmedlyfe
Junior member
 
Join Date: October 11, 2000
Location: SC
Posts: 799
I feel REAL bad....I'm using 40mm cans for 45acp and 7.62mm. That doesn't count the varied 30cal and 50cal cans lying around with everything else in 'em. I KNEW there was something wrong with me....
Charmedlyfe is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07518 seconds with 7 queries