The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old April 15, 2012, 03:25 PM   #1
chaz12
Senior Member
 
Join Date: May 22, 2008
Posts: 209
Antiquing a Uberti Hombre

I don't care for the flat finish on these revolvers, but I had the idea of anitiquing the finish because I do like the uberti old west finish that they offer. I have seen several articles online describing different methods of getting an antique look.

The problem would be the flat brass backstrap and trigger guard. Has anyone tried to alter the finish on one of these revolvers? Any ideas on what you could do with the brass?

Chaz
chaz12 is offline  
Old April 15, 2012, 04:03 PM   #2
noelf2
Senior Member
 
Join Date: April 14, 2008
Location: Stafford, VA
Posts: 1,744
I'm not an expert, but I know that black powder fouling will give brass an aged patina.
__________________
Liberty and freedom often offends those who understand neither.
noelf2 is offline  
Old April 15, 2012, 05:32 PM   #3
zullo74
Junior member
 
Join Date: August 8, 2009
Posts: 374
I age my brass with a paste of 3F BP and Dawn liquid dish soap. Paint it on, let it sit a spell and then rinse it off with water.
zullo74 is offline  
Old April 16, 2012, 10:23 AM   #4
Ultravox
Member
 
Join Date: January 11, 2011
Location: Minneapolis, MN
Posts: 75
I polished the brass bits of my Hombre.

I started by wet sanding it with 600 grit paper and finished with a felt wheel and some polish.

It's not antiqued, but it looks better than the flat finish.

__________________
Come check out my custom 1911 grips and other wooden items at my Etsy store.
Ultravox is offline  
Old April 16, 2012, 03:51 PM   #5
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,693
IMHO you don't want polished brass on an antiqued gun but you might want to polish it before you age it.
Hawg is offline  
Old April 17, 2012, 07:57 AM   #6
Fairshake
Member
 
Join Date: August 2, 2009
Location: Livingston, La. about 20 miles East of Baton Rouge, Louisiana
Posts: 30
Antique look

I purchased a pair of USFA Rodeo's from Longhunter about 3 years ago in 44WCF.
As soon as I received them I used 0000 steel wool and Krano oil all over the guns. You don't push down hard but just use a normal pressure with the 0000.
I have had people think that I was shooting a old pair of Colts with the look I received. Go slow and wipe the gun clean as you go so that you end up with the look you want and not all the way back to the white. Take Care David
__________________
SASS Frontier Cartridge class, 100% BP Shooter,
Fairshake is offline  
Old April 17, 2012, 11:02 AM   #7
indy1919
Senior Member
 
Join Date: February 15, 2011
Posts: 277
Perhaps this is not quite antiquing but a few years ago found an Uberti that was new called distressed. And where as some of the distressed guns looked like the finish was half hurt, This one does look ... well.. distressed ..



indy1919 is offline  
Old April 21, 2012, 08:17 PM   #8
BerdanSS
Senior Member
 
Join Date: April 3, 2011
Location: to close to other houses
Posts: 919
I polished mine as well, used a felt tip on the dremmel and JB bore paste gives it a nice look; kinda reminds me of my old 51 navy now. I've heard the 0000 steel wool works well also for "antiquing". Been wanting to try to lightly "polish" the whole thing to give it a used satin "blue" look rather than the flat black.

Here she is in current form....best $250 I ever spent....Still a little PO'ed mine didn't have the edge of the cylinder beveled though




Quote:
zullo74

I age my brass with a paste of 3F BP and Dawn liquid dish soap. Paint it on, let it sit a spell and then rinse it off with water.
I'd like to see that

Last edited by BerdanSS; April 21, 2012 at 10:06 PM.
BerdanSS is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07832 seconds with 7 queries